ESP32-S3-Touch-LCD-4.3B is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4..
Need a USB-C cable that allows you to transfer data and switch the power? This is it!There are plenty of USB power switch cables out there. But all th..
This lightweight (about 15 g) but strong bracket is made from 3mm-thick black anodized aluminum and is specifically designed to work with the typical ..
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7..
Sonoff Basic is an affordable WiFi smart switch that provides users with smart home control. It is a remote control power switch that can connect to a..
Description: This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable..
Description: This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable's wires have been color coded to Red, Black, Blue, and Yellow.
The SparkFun Qwiic connect ..
Description: This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable's wires have been color coded to red, black, blue and yellow.
This cable is used for connecti..
Description: The SparkFun 9DoF IMU Breakout incorporates all the amazing features
of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete
with a logic shifter and broken out GPIO pins for all your motion
sensing needs. The ICM-20948 itself is an extremely low powered, I2C
and ..
Description: The SparkFun SGP40 Air Quality Sensor provides a measurement of the
quality of the air in your room or house. The SGP40 is based on
Sensirion's CMOSens® technology and uses a metal oxide (MOx)
sensor with a temperature controlled micro hotplate and provides a
humidity-compensate..
The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to
measure barometric pressure, humidity, and temperature readings, all
without taking up too much space. Basically, you can find out anything
you need to know about atmospheric conditions from this tiny breakout.
The BME280 Brea..
Description: The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality
stereo codec with 1W Stereo Class D speaker drivers and headphone
drivers. The WM8960 acts as a stereo audio ADC and DAC and communicates
using I2S, a standard audio data protocol (not to be confused with I2C).
..
Description: The SparkFun Auto pHAT for Raspberry Pi is an all in one robotics package that focuses on quickly adding robot functionality and support to your Raspberry Pi or other single-board computer. The Auto pHAT can drive two small DC motors with or without encoders and up to four servo motors ..
Description: The SparkFun Differential I2C Breakout is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential signals, two for SCL and two for SDA. The differential signals a..
Description: This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. The VL53L4CD from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit a..
Description: The SparkFun MAX-M10S Breakout is an ultra-low-power, high
performance, miniaturized GNSS board that is perfect for battery
operated applications that don't possess a lot of space, such as asset
trackers and wearable devices. The MAX-M10S module from u-blox has an
extremely low ..
Description: The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter accur..
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.