-23 %
Brand: Waveshare
Model: W14718
Description: This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors.
Tired of the 5x5 LED matrix? Time to get a tiny monitor for your micro:bit, this one would be the ideal choice.
Features:
micro:bit edge conn..
19.90€ 25.90€
Ex Tax:16.05€
Brand: Waveshare
Model: W14513
Description: This is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.
Specifications:
Dimension: 82.05mm x 36.10mm
Through holes diameter: 2mm
Wiki: www.waveshare.com/wiki/Edge_Breakout_for_micro:bit..
9.90€
Ex Tax:7.98€
Brand: Waveshare
Model: W14955
Description: Raspberry Pi Camera Cable FFC 60cm. This cable is 600mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit.
Category: FFC
For use with: Raspberry Pi Cameras
Length: 600mm..
5.90€
Ex Tax:4.76€
Brand: Waveshare
Model: W8781
Description: GPS External Antenna, Ceramics with Amplifier. Comes with IPX to SMA Adapter wire.
Features(Ceramics):
Center Frequency: 1575 ±1MHz
Band Width: CF ±8MHz
Polarization: RHCP
Gain: 5dBic (Zenith)
V.S.W.R: < 1.5
Resistance: 50Ω
Axial Ratio: 3dB (max)
Dimension: 25x..
12.90€
Ex Tax:10.40€
Brand: Waveshare
Model: W15264
Description: This is a camera module (without driver PCB) compatible with the official Raspberry Pi Camera Board V2, with 8-megapixel IMX219 sensor and features 160 degree field of view.
If you got a Raspberry Pi Camera Board V2 and just want to try something new, here it is.
Features:
I..
17.90€
Ex Tax:14.44€
Brand: Waveshare
Model: W10656
Description: Jumper Wire 3-pin to separated pins ~ 20 cm
Connector : 3-pin female connector in on end, separated pins in the other end
Pitch : 2.54mm..
1.30€
Ex Tax:1.05€
Brand: Waveshare
Model: W10657
Description: Jumper Wire 4-pin to separated pins - 20 cm
Connector : 4-pin female connector in on end, separated pins in the other end
Pitch : 2.54mm..
1.30€
Ex Tax:1.05€
Brand: Waveshare
Model: W10658
Description: Jumper Wire 5-pin to separated pins ~ 20 cm
Connector : 5-pin female connector in on end, separated pins in the other end
Pitch : 2.54mm..
1.30€
Ex Tax:1.05€
Brand: Waveshare
Model: W11619
Description: Case for Raspberry Pi - Does not Include Raspberry Pi as shown in picture.
For use with:
Raspberry Pi Model B+
Raspberry Pi 2 Model B
Raspberry Pi 3 Model B
Raspberry Pi 3 Model B+
Type: J
Color: black
Side slots to access the connectors
Unibody, neat,..
6.90€
Ex Tax:5.56€
Brand: Waveshare
Model: W14542
Description: Speaker expansion module designed for micro:bit, makes your micro:bit become a music player easily.
Furthermore, it can also be used for Arduino development, compatible with 3.3V/5V Arduino boards.
Features:
Onboard Hi-Fi chip NS8002
Sound volume adjustment
Earphone jack..
11.90€
Ex Tax:9.60€
Brand: Waveshare
Model: W25077+25974
Description: UGV02 is a 4WD six-wheel mobile robot chassis with superb off-road performance, shock absorbers, and open-source code that supports customization development. It supports external host computers (Raspberry Pi, Jetson Nano, Horizon Sunrise X3 Pi, etc.), and the host computer communicates..
469.00€
Ex Tax:378.23€
Brand: Waveshare
Model: W24101
Description: 0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication (upper yellow & lower blue). Include jumper cable female-female 7pin.Features:
Ultra-narrow bezel, conpact size, with onboard voltage translatorAdopts 4-wire SPI and I2C interfaces, better compatibility, ..
8.60€
Ex Tax:6.94€