Brand: Olimex
Model: OL-UEXTx5
Description: Typically this splitter board comes in handy when you have to connect more than one I2C module to an Olimex board. It can also help to connect three or more expansion boards using the different UEXT interfaces - I2C(s), SPI and UART. It saves the hustle of soldering or creating custom c..
5.90€
Ex Tax:4.76€
Brand: Olimex
Model: OL-SOMA13-WIFI-4GB
A13-SOM-WIFI-4GB is System on Chip module shield which add WIFI connectivity to A13-SOM-XXX. All A13 signals are available on 0.1" holes.
A13-SOM-WIFI-4GB is Open Source Hardware shield reference design with Eagle CAD files, so everyone can modify and tailor to his needs.
Featires:
4GB N..
25.90€
Ex Tax:20.89€
Brand: Olimex
Model: OL-SOMA13-WIFI
A13-SOM-WIFI is System on Chip module shield which add WIFI connectivity to A13-SOM-XXX. All A13 signals are available on 0.1" holes.
A13-SOM-WIFI is Open Source Hardware shield reference design with Eagle CAD files, so everyone can modify and tailor to his needs.
Featires:
RTL8188CU
U..
15.90€
Ex Tax:12.82€
Brand: Olimex
Model: OL-MOD-USB3G
Description: MOD-USB3G would also work with your laptop and desktop computer - the drivers are located inside the unit. Note that due to impulse current surges (up to 2A) you might be unable to use MOD-USB3G with other Olimex boards out-of-the-box. You would either need to make hardware adjustements..
24.90€
Ex Tax:20.08€
Brand: Olimex
Model: OL-A20LIME2-4GB
Description: Open Source Hardware Embedded ARM Linux single board computer with Allwinner A20 dual core CORTEX-A7 1GB RAM and Gigabit Ethernet
Features:
Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU
1GB DDR3 RAM memory
4GB NA..
72.90€
Ex Tax:58.79€
Brand: Olimex
Model: OL-A4983
Description: A4983 driver can control stepper motors and have two channels. The board can also power gear motors. It might be supplied by voltage in the 6V to 35V range. Arduino, Pinguino, Maple can be used to control motors via this board. The spring contacts allow easy connect-disconnect of motor ..
14.90€
Ex Tax:12.02€
Brand: Olimex
Model: OL-KTY81-3M
Description: PTC thermistor -55+125C with 3 meter cable 2x0.5mm2 suitable for Arduino temperature control..
9.90€
Ex Tax:7.98€
Brand: Olimex
Model: OL-KTY81-1M
Description: PTC thermistor -55+125C with 1 meter cable 2x0.5mm2 suitable for Arduino temperature control..
7.90€
Ex Tax:6.37€
Brand: Olimex
Model: OL-nRF8001
Description: Allows BLE devices like iPhone, Samsung Galaxy, etc. to connect to Arduino boards. MOD-nRF8001 has demo examples for Arduino (AVR), Pinguino (PIC32) and Maple (STM32).
Features:
nRF8001 Bluetooth v4 low-energy transceiver
UEXT pads provided
Two rows of pads for easier ..
15.95€
Ex Tax:12.86€
Brand: Olimex
Model: OL-ESP32-EVB-EA-BOX
FEATURES
M3x4 8 pcs
HEX-3X6 4 pcs
METAL TOP 1 pcs
METAL BOT 1 pce
Dimensions: 85x80x25mm..
12.90€
Ex Tax:10.40€
New
Brand: Olimex
Model: OL-ESP32-C6-EVB-BOX
FEATURES
Opening for Relay terminalsOpening for Input terminalsOpening for the status LEDsOpening for UEXT connectorOpening for Reset buttonDimensions: 104 x 74 x 23 mm..
12.90€
Ex Tax:10.40€
Brand: Olimex
Model: OL-POW-36512
Description: DC-DC Step Down converter with input power supply 9-36V DC and fixed output 5V or 12V DC.
Input voltage range: (9-36)VDC
Fixed output voltage: 5V or 12V selectable
Output current up to 2.5A
Screw terminal and power jack for input
Screw terminal, USB-A connector, and batter..
15.90€
Ex Tax:12.82€