Brand: Sparkfun
Model: BOB08276XX
Description: This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the female sockets to a..
5.95€
Ex Tax:4.80€
Brand: Sparkfun
Model: CAB09556
Description: This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. ..
6.50€
Ex Tax:5.24€
Brand: Sparkfun
Model: TOL12942
Description: The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminate..
39.90€
Ex Tax:32.18€
Brand: Sparkfun
Model: DEV13262
Description: The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or ou..
32.90€
Ex Tax:26.53€
Brand: Sparkfun
Model: RTL10769
Description: This is the same product as the OBD-II UART. The difference is this version comes with the appropriate cable in fancy clamshell packaging and is meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding it..
65.50€
Ex Tax:52.82€
Brand: Sparkfun
Model: PRT12618
Description: This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back...
2.95€
Ex Tax:2.38€
Brand: Sparkfun
Model: PRT00783
Description: Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.
Documents: Datasheet..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: DEV11649
Description: The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can't wait to see what you're able to do with it! The shield's features include:
Three linear slide potenti..
33.25€
Ex Tax:26.81€
Brand: Sparkfun
Model: PRT07942
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40.
This is a 300mil wide 28-pin socket...
1.00€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT07944
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!
This is a 600mil wide 40-pin socket...
1.60€
Ex Tax:1.29€
Brand: Sparkfun
Model: COM08034
Description: DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as general control switches.
Documents: Datasheet..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: LCD10150
Description: E-paper displays are rad. They can maintain an image even after power has been removed. They also have very high contrast and low power consumption. This particular display is a 10x2 character display, allowing you to display up to 20 characters.
Check the datasheet below for informa..
28.20€
Ex Tax:22.74€