Brand: Sparkfun
Model: BOB12731
Description: This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.
With t..
21.90€
Ex Tax:17.66€
Brand: Sparkfun
Model: BOB13830
↵
Descrition: The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other sup..
15.90€
Ex Tax:12.82€
Brand: Sparkfun
Model: BOB15100
Description: With this USB breakout you will finally be able to incorporate a USB-C connector into your projects without needing to solder each tiny SMD pad. The SparkFun USB-C Breakout supplies up to three times the power as previous USB iterations and also solves the universally frustrating dilemm..
6.95€
Ex Tax:5.60€
Brand: Sparkfun
Model: WRL13287
Description: The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development b..
17.90€
Ex Tax:14.44€
Brand: Sparkfun
Model: KIT14051
Description: The SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Before the wireless joystick, radio-controlled projects used hobby RC transmitters, the same ones used for RC cars, boats and planes. The problem with these transmitters is that many aren’t custom..
42.90€
Ex Tax:34.60€
Brand: Sparkfun
Model: KIT15936
Description: This is the SparkFun XBee 3 Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee 3 Modules, one XBee Explorer, one Xbee Shield and a set of Arduino R3 headers to solder onto the shield. Our entire goal for the XBee Kit was ..
109.90€
Ex Tax:88.63€
Brand: Sparkfun
Model: COM11089
Description: This through-hole speaker is great for projects where you need something that sounds better than a piezo buzzer but don't have room for a full-blown speaker. This 30mm diameter speaker is encased in plastic and will handle about 100mW of power.
Features:
8 ohm0.1W (0.2..
3.50€
Ex Tax:2.82€
Brand: Sparkfun
Model: SEN13835
Description: The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks to its minimal solid state design, this sensor has ..
33.90€
Ex Tax:27.34€
Brand: Sparkfun
Model: SEN14588
Description: The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditions and the reflectivity of your targe..
61.90€
Ex Tax:49.92€
Brand: Sparkfun
Model: SEN14786
Description: The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditions and the reflectivity of your targe..
60.76€
Ex Tax:49.00€
Brand: Sparkfun
Model: SEN00251
Description: 36" high temperature Type-K Thermocouple with glass braid insulation.
Features:
Type-K Thermocouple (Ni-Cr)
30 gauge stripped and prepped wires
Thermocouple range : -270 to +1372C (-454 to +2501F)
Glass braid insulation range : -73 to +482C(-100 to +900F)
Yellow + / Red..
18.90€
Ex Tax:15.24€
Brand: Sparkfun
Model: SEN13715
Description: This is a stainless steel, Type-K Thermocouple probe.
A thermocouple works by taking two wires made of dissimilar metals,
connecting them at the two ends, and making a temperature gradient
between one end and the other (a 'hot' end and a 'cold' one). Once this
is achieved, a vol..
7.90€
Ex Tax:6.37€