Brand: Robomaa.com
Model: RM-112
Introduction
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
Specifications
..
4.95€
Ex Tax:3.99€
Brand: Robomaa.com
Model: RM-LED-R
Introduction: This package includes 5 5mm Red LEDs.
Specification:
Diode type LED
LED diameter 5mm
LED colour red
Luminosity 220-330mcd
Viewing angle 15°
Front convex
Wavelength 620-630nm
LED lens transparent
LED current 1mA
Operating voltage 1.6...2.3V
Mounting THT
Te..
1.00€
Ex Tax:0.81€
Brand: Robomaa.com
Model: 9789529298136
Arduino, perusteista hallintaan: Maailman myydyin Arduino-opas - Getting Started with Arduino - nyt Suomeksi!
Arduino on avoin elektroniikan kehitysalusta, jonka suosio on kasvanut räjähdyksenomaisesti elektroniikan harrastajien keskuudessa kaikkialla maailmassa.
Tämä perusteellinen johdanto A..
24.90€
Ex Tax:22.64€
Brand: Robomaa.com
Model: RM-BA-14500
Protected 14500 Li-ion Rechargeable Battery P1450C
Minimum Capacity: 700mAh
Typical Capacity: 800mAh
Normal Voltage: 3.7V
Quality Li-ion rechargeable cell made in China
In Built Safety Circuitry
Protection Circuit (Against overcharge, over discharge, over current and short-circuit.)
..
9.90€
Ex Tax:7.98€
Brand: Robomaa.com
Model: RM-115
Description: Nylon short standoffs - M3 x 10 Hexagonal Standoff - 10 Set. Used to get your proto board up off the table...
3.95€
Ex Tax:3.19€
Brand: Robomaa.com
Model: RM-114
Description: Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
Specifications:
Hexagonal standoffs length: 10 mm
Material: Nylon
Shipping List:
M3 x 10 hexagonal standoffs (10 units)
M3 x 5 screws (10 units)
M3 nuts (10 units)..
5.95€
Ex Tax:4.80€
Brand: Robomaa.com
Model: RPi-SDAdap
Description: Raspberry Pi (not 2,3,4) low-profile microSD card adapter can be used to convert a microSD card for direct use with your Raspberry Pi (not 2/3/4) or MacBook, without the use of full size SD card...
2.95€
Ex Tax:2.38€
Brand: Robomaa.com
Model: RM-TACT67
Description: We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA.
Contacts configuration: SPST-NO
Number of positions: 2
Sta..
0.50€
Ex Tax:0.40€
Brand: Robomaa.com
Model: RM-BA-250
Description: This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit protection.
Features:
Charge Limited Voltage 4.2V
Nominal Voltage 3.7V
Nominal Capacity 250mAh@ 0.2C Discharge
Nominal Capacity refer to the ..
8.90€
Ex Tax:7.18€
Brand: Robomaa.com
Model: RM-POW12/2
Description: Power Supply, 12V 2A, Euro - color and shape may vary
Output Voltage Nom: 12V
Output Current Max: 2A
Output Connector: 5,5/2,1
Plug Type: EU
Center positive..
13.90€
Ex Tax:11.21€
Brand: Robomaa.com
Model: RM-RES
Description: 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K Ohm resistors make excellent LED current limiters and/others are great for general use...
1.45€
Ex Tax:1.17€
Brand: Robomaa.com
Model: LED-5M
Description: This kit contains everything you need to build your very own Uno-compatible "RedBoard" development board! Simply follow the Assembly Guide and after some basic soldering, you'll have made a fully-functional Arduino-compatible development board (in fashionable SparkFun Red). The included..
54.00€
Ex Tax:43.55€