Brand: Seeedstudio
Model: OL-SNS-IR-3-80
Description: SNS-IR-3-80 is an infrared distance switch. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use/assemble, inexpensive. Useful for robot, interactive media, industrial assembly line, etc.
Features:
operating voltage 5VDC
consumption 50mA
diameter 18 mm..
11.90€
Ex Tax:9.60€
Brand: Microbot
Model: MR003-004.2
Description: GP2Y0D810Z0F is a distance measuring unit, composed of an integrated combination of PSD (position sensitive detector), IRED (infrared emitting diode) and signal processing circuit.
The output voltage of this sensor stays high in case an object exists in the specified distance range. ..
9.90€
Ex Tax:7.98€
Brand: Sparkfun
Model: SEN00241
Description: Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a simple ADC on any microcontroller will allow variable readings to be collected from the detector. T..
2.55€
Ex Tax:2.06€
Brand: Sparkfun
Model: COM09854
Features:
IR LEDs
Standard size - T1 3/4 5mm
1.4-1.6V forward drop
Max current 20mA..
1.50€
Ex Tax:1.21€
Brand: Sparkfun
Model: COM11759
Description: Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. We have designed the remote to be small, very simple, and low-cost. For the majority of the projects we build, we don’t need 34 button..
5.90€
Ex Tax:4.76€
Brand: DFRobot
Model: DFR0107
ntroduction
This IR kit provides a remote control capability to your project.
Documents
Arduino Library
Wiki Doc
Shipping List
IR Remote Controller (1 unit)
IR Receiver Module (1 unit) (SKU: DFR0094)
Digital Cable (1 unit)..
12.10€
Ex Tax:9.76€
Brand: Sparkfun
Model: SEN08554
This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Documents:
Datas..
13.00€
Ex Tax:10.48€
Brand: Sparkfun
Model: SEN10266
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN di..
2.95€
Ex Tax:2.38€
Brand: Sparkfun
Model: ROB09454
This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.
The board's QRE1113 IR reflec..
6.00€
Ex Tax:4.84€
Brand: Sparkfun
Model: SEN13285
Description: This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.
This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire ..
12.90€
Ex Tax:10.40€
Brand: Seeedstudio
Model: SEE101020060
PIR（Passive Infrared Detection）are used to detect motion of human movement. This version has a large lens which can support long range and wide angle. 2.54mm standard connector is easy to fix it anywhere.
Features:
Long range
Wide angle
Low consumption
Specifications:
Input V..
10.00€
Ex Tax:8.06€
Brand: Pololu
Model: Pol38IR/2460
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA and has a typical sensing range up to approximately 24 inches (60 cm).
Overview: These sensor mo..
6.95€
Ex Tax:5.60€