Menu
Your Cart
Welcome to the new Robomaa online store!

Motor Drivers & Controllers

Brand: DFRobot Model: DRI0001
This Motor shield for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current. This shield can be directly mount onto standard Arduino Duemilanove and Arduino Mega. Specification 2 way 7-12V motor drive Up to 1A current each way Pin 5,6,7,8 are used to dr..
17.21€
Ex Tax:13.71€
Brand: DFRobot Model: DRI0002
This is a4.8-46V, 2A Dual Motor Controller which is the revised version of the DF-MDV1.0. Its performance has been improved greatly. It can bear larger current due to the increased haetsink dissipation. It is easy to control, using LGS's outstanding high-power motor driver chip, the L298N. This chip..
17.50€
Ex Tax:13.94€
Brand: Sparkfun Model: DEV09815
The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3. This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The b..
30.57€
Ex Tax:24.35€
Brand: Microbot Model: MR001-004.3
Description: The DC Dual Motor Driver 30V 4A V2 allows to indipendently drive two DC motors, controlling both velocity and direction. It is based on the famous integrated circuit L298, producted by STMicroelectronics; the L298 is an integrated monolithic circuit in a PowerSO20 package. It is a hi..
19.13€
Ex Tax:15.24€
Brand: Pololu Model: DRV8833/2130
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver..
8.10€
Ex Tax:6.45€
Brand: DFRobot Model: DRI0023
INTRODUCTION: Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins. This ..
46.46€
Ex Tax:37.02€
Brand: Microbot Model: MR007-001.1
Description: The Dual DC Motor Shield is a shield that has been projected to enable an Arduino board to drive two brushed DC motors or one 4-wire two-phase stepper motor, controlling the speed and direction of each one independently. Some applications may need to control the motor speed or a serv..
27.23€
Ex Tax:21.69€
Brand: Microbot Model: MR001-003.2
Description: The Easy Motor Controller allows to control the speed and the direction of rotation of a DC motor through three different possible inputs: analog (potentiometer), radio control RC, I2C digital communication. Its use is very simple and you do not have to do anything, the type of input..
19.13€
Ex Tax:15.24€
Brand: Pololu Model: POLO/3147
Description: This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio co..
186.67€
Ex Tax:148.74€
Brand: Devantech Model: MD04
Description: The MD04 is a medium power motor driver and is an upgraded replacement for the MD03, the main features are ease of use and flexibility. The motor's power is controlled by on-board Pulse Width Modulation (PWM) generators driving the H-Bridge Transistors. Voltage - 8v - 24v Current - up t..
65.69€
Ex Tax:52.34€
Brand: Sparkfun Model: DEV10182
Description: This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current ..
83.50€
Ex Tax:66.53€
Brand: Sparkfun Model: ROB09457
Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately contro..
10.12€
Ex Tax:8.06€
Showing 1 to 12 of 48 (4 Pages)
Cookies
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.