Search Criteria
Products meeting the search criteria
Brand: Sparkfun
Model: DEV12924
Description: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rap..
16.09€
Ex Tax:12.82€
Brand: Robomaa.com
Model: RM-TCAB141
Black USB Cable 2.0 USB A to Micro B 0.1m (10cm)
- Only for charging -..
2.38€
Ex Tax:1.90€
Brand: Devantech
Model: USB-RS485B
Description: The USB-RS485 is a complete, self powered, USB to RS485 interface working at any baud rate up to 250k baud. It features automatic bus turn-around - any time your not transmitting the module is listening. Uses the ST485 quarter power tranceiver, so you can have up to 128 devices on the b..
26.21€
Ex Tax:20.89€
Brand: Waveshare
Model: W17286
Description: This is an industrial USB to RS485 converter with original FT232RL inside. It features embedded protection circuits such as lightning-proof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size.
The USB TO RS485 is very easy to use, allows automatic transcei..
15.50€
Ex Tax:12.35€
Brand: Sparkfun
Model: KIT14526
Description: The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle. Once the Stem is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Raspberry Pi then acts as a USB device using its own ..
10,119.96€
Ex Tax:8,063.71€
Brand: Sparkfun
Model: DEV15443
Description: We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board. The RedBoa..
22.16€
Ex Tax:17.66€
Brand: Pololu
Model: POLO/3133
Overview: The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces–USB for direct connection to a computer, TTL serial and I²C for use with a m..
80.46€
Ex Tax:64.11€
Brand: Olimex
Model: OL-USB-SERIAL-F
Description: Completely assembled and tested USB serial cable with female connectors. Suitable for OLinuXino and SOM boards among others.
FEATURES:
USB to serial cable
Three wires for Breadboard connection
SERIAL output 3.3V voltage levels
GND=BLUE, RX(INPUT)=GREEN, TX(OUTPUT)=RED
..
10.02€
Ex Tax:7.98€
Showing 1 to 8 of 8 (1 Pages)