Search Criteria
Products meeting the search criteria
Brand: Sparkfun
Model: PRT17258
Description: This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable..
2.53€
Ex Tax:2.02€
Brand: Sparkfun
Model: PRT14427
Description: This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable's wires have been color coded to Red, Black, Blue, and Yellow.
The SparkFun Qwiic connect ..
2.13€
Ex Tax:1.69€
Brand: Sparkfun
Model: PRT14429
Description: This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable's wires have been color coded to red, black, blue and yellow.
This cable is used for connecti..
2.94€
Ex Tax:2.34€
Brand: Sparkfun
Model: SEN15335
Description: The SparkFun 9DoF IMU Breakout incorporates all the amazing features
of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete
with a logic shifter and broken out GPIO pins for all your motion
sensing needs. The ICM-20948 itself is an extremely low powered, I2C
and ..
24.29€
Ex Tax:19.35€
Brand: Sparkfun
Model: SEN18345
Description: The SparkFun SGP40 Air Quality Sensor provides a measurement of the
quality of the air in your room or house. The SGP40 is based on
Sensirion's CMOSens® technology and uses a metal oxide (MOx)
sensor with a temperature controlled micro hotplate and provides a
humidity-compensate..
24.19€
Ex Tax:19.27€
Brand: Sparkfun
Model: SEN15440
The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to
measure barometric pressure, humidity, and temperature readings, all
without taking up too much space. Basically, you can find out anything
you need to know about atmospheric conditions from this tiny breakout.
The BME280 Brea..
21.96€
Ex Tax:17.50€
-15 %
Brand: Sparkfun
Model: BOB21772
Description: The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality
stereo codec with 1W Stereo Class D speaker drivers and headphone
drivers. The WM8960 acts as a stereo audio ADC and DAC and communicates
using I2S, a standard audio data protocol (not to be confused with I2C).
..
20.44€ 24.09€
Ex Tax:16.29€
Brand: Sparkfun
Model: ROB16328
Description: The SparkFun Auto pHAT for Raspberry Pi is an all in one robotics package that focuses on quickly adding robot functionality and support to your Raspberry Pi or other single-board computer. The Auto pHAT can drive two small DC motors with or without encoders and up to four servo motors ..
38.36€
Ex Tax:30.56€
Brand: Sparkfun
Model: BOB14589
Description: The SparkFun Differential I2C Breakout is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential signals, two for SCL and two for SDA. The differential signals a..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: SEN18993
Description: This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. The VL53L4CD from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit a..
26.82€
Ex Tax:21.37€
Brand: Sparkfun
Model: GPS18037
Description: The SparkFun MAX-M10S Breakout is an ultra-low-power, high
performance, miniaturized GNSS board that is perfect for battery
operated applications that don't possess a lot of space, such as asset
trackers and wearable devices. The MAX-M10S module from u-blox has an
extremely low ..
59.61€
Ex Tax:47.50€
Brand: Sparkfun
Model: GPS15712
Description: The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter accur..
80.87€
Ex Tax:64.44€