Industrial USB TO TTL (C) 6pin Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Hardware Flow Control

Industrial USB TO TTL 6pin serial cable, adopts original FT232RNL chip, onboard power supply and signal indicators, supports 3.3V/5V voltage level switching, built in self-recovery fuse, ESD and IO protection diode circuits, etc.

Specifications:

• Chip Scheme: FTDI original FT232RNL
• Host port: USB
• Data rate: 300bps ~ 3Mbps
• Device port: UART
• USB port: USB-A
• USB port protection: self-recovery fuse, ESD protection
• UART port connector: separated 6pin female header
• UART port protection: IO protection diode
• Indicator: PWR, TXD, RXD
• Cable: PVC sheath, length 1m

Pinouts Definition:

• VCC: 3.3V or 5V output, configured by switch
• GND: Ground
• TXD: Connecting to MCU.RXD (signal direction: MCU.RX < < FT232 < < PC.TX)
• RXD: Connecting to MCU.TXD (signal direction: MCU.TX > > FT232 > > PC.RX)
• RTS: Connecting to MCU.CTS (signal direction: MCU.CTS < < FT232 < < PC.RST)
• CTS: Connecting to MCU.RTS (signal direction: MCU.RTS > > FT232 > > PC.CTS)

WIKI: http://www.waveshare.com/wiki/USB_TO_TTL_(C)