ETH002 - 16Amp, 2 Channel Relay Module

Description: This 2-Channel Ethernet Relay Board allows to switch two loads up to 16A with simple TCP/IP commands.

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12VDC supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12VDC. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals.

• Number of Relay's - 2
• Power - 12V DC adaptor, supplied separately.
• Configuration & Test interface - HTTP (webpage).
• Control interface - TCP/IP over Ethernet.
• Relay current - Up to 16Amp @24vdc or 250vac
• Connections - Screw Terminals for N/O N/C and Common contacts.

Download: Full ETH002 Documentation

Free Android and iPhone Apps are available to remotely control this module.