dSX42K - dScript expansion module

Description: Expansion K type Thermo-couple board and 2 extra relays for the dScript modules, powered and controlled through the dS modules RS485 port.

Hardware:

• Serial ports - 1 x RS485 port
• Relays - 2 with up to 16Amp @24vdc or 250vac, screw Terminals for N/O N/C and Common contacts
• Inputs - 2 Volt Free Contact (VFC), connect directly to switches or relay contacts. 1 K-type Thermo-couple input. Cold junction compensated. Hot (probe) and Cold (PCB) temperatures are available
• Power - 12v from connected dScript module (requires twin pair cable) or directly on screw terminals if required

Compatible dScript modules: dS2242, dS378, dS3484, dS2824, dS2832, dS2408.

Cable length up to 300 meters, depending on cable quality. Configuration Easy setup via dSx configuration page on the dScript module. After configuration Relays and Inputs operate as if they were local.

Documentation: https://www.robot-electronics.co.uk/dscript.html