USB to TTL Serial Cable - Debug / Console Cable

Description: The cable is easiest way to connect to your microcontroller / Raspberry Pi serial console port. Inside the big USB plug is a USB <--> Serial conversion chip and at the end of the 90cm cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi. Connect the pins as shown to power the Pi and establish the RX/TX link.

• Embedded convertor: PL2303
• Supports Linux, MAC, Windows XP/7/8/8.1/10/...
• Connector: USB Type-A plug, 4-pin 2.54mm pinheader
• Pinout: Red - VCC (5V), Black - GND, Green - TXD (3.3V TTL, connects to target RXD), White - RXD (3.3V TTL, connects to target TXD)