Brand: Pololu
Model: POLO/240
With our 16-servo controller, any microcontroller or computer can drive up to sixteen independent RC servos, using the same serial interface as our serial motor controllers. This product is available only in kit form.
Device specifications
PCB size: 1.50" x 2.275"
Servo ports: 16
Resolu..
51.01€
Ex Tax:40.65€
Brand: Sparkfun
Model: COM11706
Description: Do you fear that your power may not be "far reaching" enough? How would another 3' work for you? Okay, so it doesn't sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Don't hack apart a nice clean barrel jack connection just because it won..
2.99€
Ex Tax:2.38€
Brand: Sparkfun
Model: SEN08554
This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Documents:
Datas..
10,119.96€
Ex Tax:8,063.71€
Brand: Sparkfun
Model: DEV10549
Description: The JPEG Trigger interfaces with the LinkSprite JPEG Color Camera to simplify picture taking. To take a picture, all you have to do is pull one of three digital pins to ground (D2, 3 or 4), or pull one of three analog pins to 5V (A0, 1 or 2). The on-board Arduino compatible ATmega328 is..
30.57€
Ex Tax:24.35€
Brand: Sparkfun
Model: SEN10888
Description: The LSM303DLMTR is a triple axis accelerometer combined with a triple axis magnetic sensor. This arrangement allows for the LSM303 to perform 6D orientation detection. This breakout board uses the LSM303DLMTR to give you all the data you need to feed into a microcontroller and calculate..
33.65€
Ex Tax:26.81€
Brand: Robomaa.com
Model: RPi-SDAdap
Description: Raspberry Pi (not 2,3,4) low-profile microSD card adapter can be used to convert a microSD card for direct use with your Raspberry Pi (not 2/3/4) or MacBook, without the use of full size SD card...
2.99€
Ex Tax:2.38€
Brand: Olimex
Model: OL-MOD-ENC28J60
Description: DEVELOPMENT BOARD WITH UEXT CONNECTOR AND 10 MBIT ENC28J60 ETHERNET CONTROLLER
Features:
MOD-ENC28J60 is the easiest way to add 10 Mbit ethernet connectivity to any of our boards with UEXT connector
ENC28J60 Ethernet controller with UEXT connector for easy connection to our o..
14.07€
Ex Tax:11.21€
Brand: Olimex
Model: OL-MOD-HMC5883L
HMC5883L is 3-Axis Digital Compass with 12-bit ADC that enables 1° to 2° compass heading accuracy. HMC5883L usses I2C communication interface and can connect to any board with UEXT...
15.08€
Ex Tax:12.02€
Brand: Olimex
Model: OL-MOD-LCD1X9
Description: MOD-LCD-1x9 is a LCD with a UEXT universal connector. It can be attached and it adds LCD functionality to all other development boards. The LCD is controlled by I2C.
Features:
LCD 1x9 Alphanumeric
UEXT to connect to host microcontroller (standard connector on our ARM developm..
12.04€
Ex Tax:9.60€
Brand: Olimex
Model: OL-MOD-LCD3310
Description: MOD-LCD3310 is a development board with a UEXT universal connector. It can be attached and it adds LCD functionality to all other development boards.
Features:
NOKIA3310 B/W LCD, 84x48 Wlack/White
UEXT to connect to host microcontroller (standard connector on our ARM developm..
12.04€
Ex Tax:9.60€
Brand: Olimex
Model: OL-MOD-RGB
Description: MOD-RGB is a completely open-source module suitable for controlling LED strips. The LED strips might be of the same color or of different colors. The board can be controlled via I2C or DMX interfaces (led on the UEXT connector). The board has short-circuit protection and can provide up ..
16.09€
Ex Tax:12.82€
Brand: Pololu
Model: POLO/1501
Overview
The 5" robot chassis RRC04A is an 1/8" acrylic chassis that provides a base for our micro metal gearmotors, extended brackets, and 42×19mm wheels. The robot chassis has many mounting holes that let you mount a variety of robot components to it. With a diameter of only five inches, this a..
10,119.96€
Ex Tax:8,063.71€