Brand: DFRobot
Model: DRI0001
This Motor shield for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current. This shield can be directly mount onto standard Arduino Duemilanove and Arduino Mega.
Specification
2 way 7-12V motor drive
Up to 1A current each way
Pin 5,6,7,8 are used to dr..
17.21€
Ex Tax:13.71€
Brand: DFRobot
Model: DFR0270
Introduction: This Accessory Shield for Bluno is specially made for Bluno (BLE with Arduino Uno), which is first of its kind in intergrating BT 4.0(BLE) module into Arduino Uno. Together with Bluno, this Accessory Shield forms an ideal prototyping platform for both software and hardware developers t..
30.26€
Ex Tax:24.11€
Brand: Adafruit
Model: ADA-1411
Description: You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting..
24.19€
Ex Tax:19.27€
Brand: Adafruit
Model: ADA-1272
Description: Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module. This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an SD card. Or you can leave the SD card out and ..
56.58€
Ex Tax:45.08€
Brand: Arduino
Model: A000070
Description: This Arduino 9-axis Motion shield incorporates an accelerometer, a gyroscope and a magnetometer in one neat package. Using a Bosch BNO055 orientation sensor it provides raw sensor information plus processed values which combine sensor readings. Values such as quaternions, Euler angles, ..
30.31€
Ex Tax:24.15€
Brand: Arduino
Model: A000024
Description: The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the Internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connections. Use the Ethernet library ..
36.33€
Ex Tax:28.95€
Brand: Arduino
Model: A000079
Overview: The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one indepe..
29.55€
Ex Tax:23.55€
Brand: Sparkfun
Model: DEV07914
Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at SFE and ITP @ NYU, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiR..
13.06€
Ex Tax:10.40€
Brand: Arduino
Model: A000058
Overview: The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and document..
90.99€
Ex Tax:72.50€
Brand: Arduino
Model: A000065
The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint.
The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used ..
26.52€
Ex Tax:21.13€
Brand: Sparkfun
Model: DEV09815
The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.
This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The b..
30.57€
Ex Tax:24.35€
Brand: Adafruit
Model: ADA-1141
Description: Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to assemble and customize, it also comes with great documentation and libraries...
25.20€
Ex Tax:20.08€