Brand: Raspberry Pi
Model: RPI-4-POW
Description: Power supply for Raspberry Pi 4 with USB-C connector (1.5m)...
13.06€
Ex Tax:10.40€
Brand: Sparkfun
Model: PRT14299
Description: This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered.
Note: Plea..
1.97€
Ex Tax:1.57€
Brand: Robomaa.com
Model: RM-POW12/2
Description: Power Supply, 12V 2A, Euro - color and shape may vary
Output Voltage Nom: 12V
Output Current Max: 2A
Output Connector: 5,5/2,1
Plug Type: EU
Center positive..
14.07€
Ex Tax:11.21€
Brand: Raspberry Pi
Model: RPI-4-POW34
Description: Power supply for Raspberry Pi 4 with USB-C connector (1m)...
13.06€
Ex Tax:10.40€
New
Brand: DFRobot
Model: DFR0884
This small 12~24V to 5V 3A dual USB power step-down converter
supports all 5V main controllers. Its two USB ports can output 5V/3A at
the same time. With up to 85% conversion, the buck module offers
excellent heat dissipation and has reverse connection protection and
overload protection. Whe..
12.65€
Ex Tax:10.08€
Brand: Adafruit
Model: ADA-3435
Description: With some development boards, low power usage is an afterthought. Especially when price and usability is the main selling point. So what should you do when it's time to turn around and make that project of yours run on a battery or solar? Sure you could try to hot-air that regulator off..
8.00€
Ex Tax:6.37€
Brand: Pololu
Model: POLO/2812
Description: The Pololu Pushbutton Power Switch is a compact, solid-state power switch that features built-in reverse-voltage protection and is controlled by a momentary pushbutton: one push turns on power and another push turns it off. This is a patented design initially created for use in our own ..
8.00€
Ex Tax:6.37€
Brand: Sparkfun
Model: COM18375
Description: This is a high grade DC Buck converter that inputs 8 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that need to power a USB or 5V device even while the input is varying (batte..
19.13€
Ex Tax:15.24€
Brand: Waveshare
Model: W17076
Description: The Li-polymer Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Raspberry Pi or other 5V devices, from a high capacity Li-polymer battery. It will charge the battery as well, supports bi-directional quick charge.
Compared wi..
26.21€
Ex Tax:20.89€
Brand: Olimex
Model: OL-BA-4400
Description: This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit protection.
Features:
Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
Recommended charge current 880mA
Max charge current 2200mA
Re..
18.12€
Ex Tax:14.44€
Brand: Olimex
Model: OL-BA-6600
Description: This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit protection.
Features:
Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
Recommended charge current 1320mAh
Max charge current 3300mAh
..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: PRT15353
Description: Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project on after a set amount of time. When you are done polling your sensors..
9.01€
Ex Tax:7.18€