Menu
Your Cart
Welcome to the new Robomaa online store!

Arduino Development

Brand: Pololu Model: AStar/3103
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
22.16€
Ex Tax:17.66€
Brand: Pololu Model: POLO/3145
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
32.29€
Ex Tax:25.73€
Brand: Pololu Model: AStar/3102
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
22.16€
Ex Tax:17.66€
Brand: Pololu Model: POLO/3108
Overview: The A-Star 32U4 Prime LV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient..
31.38€
Ex Tax:25.00€
Brand: Sparkfun Model: DEV13262
Description: The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or ou..
33.30€
Ex Tax:26.53€
Brand: Sparkfun Model: DEV09873
Description: This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI ca..
22.77€
Ex Tax:18.15€
Brand: Sparkfun Model: DEV09716
Description: This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI ca..
20.20€
Ex Tax:16.10€
Brand: Olimex Model: OL-NANO-BLE
Description: Allows BLE devices as iPhone, Samsung Galaxy, etc to connect to Arduino boards. Works with OLIMEXINO-NANO. Faetures: nRF8001 Bluetooth v4 low-energy transciever connectors for OLIMEXINO-NANO easier access to signals 3.3V operating voltage PCB: two layer FR-4, 1.5 mm (0,..
16.09€
Ex Tax:12.82€
Brand: Olimex Model: OL-NANO
Description: Open source hardware wearable Arduino Leonardo-like development board. Faetures: ATMEGA32U4 Arduino Leonardo compatible Works with Arduino IDE Micro USB cable connector (unlike most of the other Olimex boards which use mini USB) User button Reset button Micro SD card ..
19.13€
Ex Tax:15.24€
Brand: Sparkfun Model: BOB13601
Description: Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital ..
7.59€
Ex Tax:6.05€
Brand: Sparkfun Model: DEV12923
Description: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. With the on-board 64x48 pixel OLED, you can use the MicroView to display sensor data, emails, pin status, and more. It also fits nicely into a b..
43.42€
Ex Tax:34.60€
Brand: Sparkfun Model: DEV12924
Description: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rap..
16.09€
Ex Tax:12.82€
Showing 1 to 12 of 29 (3 Pages)
Cookies
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.