![PIC32 PINGUINO (MX220) PIC32 PINGUINO (MX220)](https://robomaa.fi/image/cache/data/PIC32-PINGUINO-MX220-550x550w.jpg)
![PIC32 PINGUINO (MX220) PIC32 PINGUINO (MX220)](https://robomaa.fi/image/cache/data/PIC32-PINGUINO-MX220-03-550x550w.jpg)
![PIC32 PINGUINO (MX220) PIC32 PINGUINO (MX220)](https://robomaa.fi/image/cache/data/PIC32-PINGUINO-MX220-80x80w.jpg)
![PIC32 PINGUINO (MX220) PIC32 PINGUINO (MX220)](https://robomaa.fi/image/cache/data/PIC32-PINGUINO-MX220-03-80x80w.jpg)
None
PIC32 PINGUINO (MX220)
Description: ARDUINO-UNO like board with PIC32MX220F032D. Generally this board outperforms ARDUINO-UNO in regard to hardware capabilities as you can see from the table below:
PIC32-PINGUINO-MX220 | ARDUINO-UNO | |
---|---|---|
CPU | 32 bit | 8 bit |
CLOCK | 40 MHz | 20 MHz |
FLASH | 32 KB | 32 KB |
RAM | 8 KB | 1 KB |
USB | YES | NO* |
LOW PWR | YES** | NO |
GPIO MAX | 40 MHz | 5 MHz |
ADC | 1.1 MSPS | 15 KSPS |
DMA | YES 4 CH | NO |
UEXT | YES | NO |
* require additional chip FT232 or ATMega with USB
** hardware allows power down to 10 uA operation for hand-held battery apps
The only Pinguino shortcoming compared with Arduino is the smaller community and the less projects available ready for use.
Features:
- PIC32MX220F032D 32 bit, 40 Mhz microcontroller 32KB Flash 8KB RAM
- Ultra Low Power design
- Li-Po battery connector for hand-held applications
- UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
- Two LEDs
- One USER BUTTON
- RESET button
- A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
- All PIC ports available on a 0.1" connector match the ARDUINO platform and the second row with correct 0.1"step
- The ICSP signals provided on a 0.1" step connector if you do not want to use Pinguino IDE and you want to program this board with PIC-KIT3.
Documents, Softwares and Hardware available at : Olimex PIC32 Pinguino site
None
- Stock: 1
- Brand: Olimex
- Model: OL-PIC32-PINGUINO
16.09€
Ex Tax: 12.82€