Brand: Dagu Electronics
Model: RS007
Includes brass hubs, wheels, battery holders and more
2 geared motors work on voltage from 3V-6V
Standard RC car wheel with a good quality rubber tyre
This is 2WD Begginners Robot Chassis. This kit comes with 2 geared motors, 2 brass hubs, 2 wheels, 2 omni wheels, 2 battery ho..
30.57€
Ex Tax:24.35€
Brand: DFRobot
Model: ROB0050
Description: Our newly upgraded 4WD MiniQ mobile robot kit is especially designed for education/learning purposes. It comes fully assembled and all your need is a PC with Arduino IDE and 4xAA battery. This new version of MiniQ 4WD Kit comes with Arduino Leonardo controller (ATmega32u4) and also inte..
121.35€
Ex Tax:96.69€
Brand: Pololu
Model: ZumoB/1410
This 0.036″-thick stainless steel plate can be mounted to the front of the Zumo chassis to create a slanted, bulldozer-like blade for pushing around objects, such as other mini-sumo robots...
4.05€
Ex Tax:3.23€
Brand: Robotis
Model: 903-0143-000
DESCRIPTION
This Li-Po battery is intended for the Bioloid Premium Kit.
PCM embedded to protect from over charge, over discharge, and excess current.
INCLUDES
LIPO 11.1V Battery Set LBS-10 : 1 pc
Battery Cover : 1 spc
F60 : 1 pc
CABLE-BAT : 1 pc
H/W SPECIFICATION
Volt..
34.61€
Ex Tax:27.58€
Brand: Robotis
Model: 903-0144-000
DESCRIPTION
This charger is intended for the Li-Po battery in the Bioloid Premium Kit.
Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A.
Support 2S and 3S Cell charge. (Exception, does not charge simultaneously)
INCLUDES: LIPO Battery Charger LBC-10..
24.29€
Ex Tax:19.35€
Brand: Olimex
Model: OL-2WD-KIT2
Description: The perfect platform for your next battle bot. Metal plate with provisions to mount Arduino and sensors.
Features:
Chassis size: 100 x 85 mm
Two 60 mm wheels
Two Gear Motors 200 RPM @ 6V/0.2A and 90 RPM @ 3.3V/0.15A
One castor free wheel
All necessary fittings...
20.14€
Ex Tax:16.05€
Brand: Olimex
Model: OL-2WD-KIT1
Description: The perfect platform for your next battle bot. Metal plate with provisions to mount Arduino and sensors.
Features:
Chassis size: 160 x 75 mm
Two 60 mm wheels
Two MS-1.3-R continuous rotation servo motors
One castor free wheel
All necessary fittings...
20.14€
Ex Tax:16.05€
Brand: Microbot
Model: MR100-001-1
The Microbot MiniRover 4WD Chassis is the ideal choice for those who want to begin exploring the exciting world of robotics by experimental practice; the choice of the Microbot MiniRover 4WD Chassis allows to take advantage of 4 powerfull gearmotors and above all a rugged aluminum structure to make ..
133.60€
Ex Tax:106.45€
Brand: Pololu
Model: OrangSV-328/1227
Want to build a small robot that doesn’t look like a PCB on wheels? The Orangutan is small enough for integrating into a small robot, rather than being the small robot. With Atmel’s powerful ATmega328P AVR microcontroller, motor drivers, buttons, display, and buzzer, all you need to add is your own ..
67.30€
Ex Tax:53.63€
Brand: Pololu
Model: POLO/1501
Overview
The 5" robot chassis RRC04A is an 1/8" acrylic chassis that provides a base for our micro metal gearmotors, extended brackets, and 42×19mm wheels. The robot chassis has many mounting holes that let you mount a variety of robot components to it. With a diameter of only five inches, this a..
10,119.96€
Ex Tax:8,063.71€
Brand: Pololu
Model: POLO/1505
Overview
The 5" robot chassis RRC04A is an 1/8" acrylic chassis that provides a base for our micro metal gearmotors, extended brackets, and 42×19mm wheels. The robot chassis has many mounting holes that let you mount a variety of robot components to it. With a diameter of only five inches, this a..
10,119.96€
Ex Tax:8,063.71€
Brand: Pololu
Model: Wheel/1435
These white plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots. The wheels have silicone tires and measure 90 mm (3.54") in diameter. Two additional mounting holes make it possible to use the wheel with several of our ..
13.16€
Ex Tax:10.48€