Brand: Adafruit
Model: ADA-3721
Description: This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I2C interface! That's right, you do not need to use a bit-bang timing-specific protocol to talk to the AM2320, it uses plain-old-I2C. ..
6.98€
Ex Tax:5.56€
Brand: Devantech
Model: TSA01
The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor.
Specification:
Operating Voltage: 2.3v to 5.0v
Operating Current: 6uA (typical)
Output: 10.0 mV/..
10.02€
Ex Tax:7.98€
Brand: Microbot
Model: MR003-001.2
This is a carrier board for the famous Microchip Technology Inc.'s TCN75A digital temperature sensor and it includes all the external components required by the sensor.
Its very small size (19x15mm) and its very light weight (only 1.1g), make it the perfect peripheral for small robots and for tempe..
8.05€
Ex Tax:6.41€
Brand: DFRobot
Model: DFR0024
Introduction: While there are many types of temperature sensors available in the market, the DS18B20 Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability. Its ultra-small size, low hardware overhead, strong anti-interference capability an..
7.08€
Ex Tax:5.65€
Brand: Sparkfun
Model: DEV08777
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the loc..
6.98€
Ex Tax:5.56€
Brand: DFRobot
Model: DFR0023
Introduction: The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature. The LM35 chip is produced by National Semiconductor Corporation and offers a functional range betw..
7.08€
Ex Tax:5.65€
Brand: Seeedstudio
Model: SEN08011P
This 2m long One Wire Temperature Sensor has a waterproof probe and long wire shape, suitable for immersive temperature detection. The chip inside this sensor is the widely adopted DS18B20. For convenience, we suggested some resources at the bottom. But you can still find tons of resources with a qu..
14.07€
Ex Tax:11.21€
Brand: DFRobot
Model: TOY0054
Introduction: The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The patented use of industry-standard, low-K polymeric dielectrics for..
19.13€
Ex Tax:15.24€
Brand: Sparkfun
Model: SEN11050
Description: This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a..
15.38€
Ex Tax:12.26€
Brand: Adafruit
Model: ADA-269
Description: Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with..
26.21€
Ex Tax:20.89€
Brand: Sparkfun
Model: SEN10988
Description: The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any external calibration to provide typical accuracies of..
2.35€
Ex Tax:1.87€
Brand: Adafruit
Model: ADA-3251
Description: It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 42% when it feels more like 77%. Enter the Si7021 Temperature + Humidity Sensor - the..
13.06€
Ex Tax:10.40€