Brand: Pololu
Model: POLO/240
With our 16-servo controller, any microcontroller or computer can drive up to sixteen independent RC servos, using the same serial interface as our serial motor controllers. This product is available only in kit form.
Device specifications
PCB size: 1.50" x 2.275"
Servo ports: 16
Resolu..
51.01€
Ex Tax:40.65€
Brand: Adafruit
Model: ADA-1411
Description: You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting..
24.19€
Ex Tax:19.27€
Brand: Pololu
Model: POLO/1350
The six-channel Micro Maestro takes serial servo controllers to the next level by incorporating native USB and internal scripting control. Whether you want the best servo controller available (0.25μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interf..
37.35€
Ex Tax:29.76€
Brand: Pololu
Model: POLO/1352
The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to ..
60.62€
Ex Tax:48.31€
Brand: Pololu
Model: POLO/1354
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to ..
74.79€
Ex Tax:59.60€
Brand: Pololu
Model: POLO/1356
The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to ..
111.33€
Ex Tax:88.71€
Brand: Sparkfun
Model: ROB09014
Description: This is our version of the OpenServo open-source servo controller board. It's meant to replace the existing controller board in any standard servo (~.78 inch servo width). With this board you can control a servo entirely with I2C/TWI commands rather than PWM, meaning that multiple OpenS..
18.32€
Ex Tax:14.60€
Brand: Pololu
Model: Multiplexer4CH/721
This compact device serves as a four-channel multiplexer of hobby radio control pulses, allowing easy switching between two independent signal sources. A fifth channel selects whether the output is from the master or the slave source: a pulse width below the threshold selects the master channels, wh..
22.42€
Ex Tax:17.86€
Brand: Devantech
Model: SD21
Description: The SD21 is a 21 channel servo controller module. It will drive up to 21 RC servo's and maintain a 20mS refresh rate, regardless of the number of servos used or their positions (pulse widths). It will control both position and speed of the servos. Full SD21 Documentation
Examples:
..
39.37€
Ex Tax:31.37€
Brand: Pololu
Model: POLO/727
The Pololu serial 8-servo controller allows you to control up to eight RC servos with almost any robot controller or computer. The interface to the servo controller is a standard RS-232 serial port or a TTL-level serial line, using any baud rate between 1200 and 38400 baud. Multiple 8-servo controll..
30.57€
Ex Tax:24.35€
Brand: Adafruit
Model: ADA-2327
Description: The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It ..
26.82€
Ex Tax:21.37€
Brand: Adafruit
Model: ADA-2348
Description: Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
Note! Raspberry Pi and motors are not included.
Since the Raspb..
31.27€
Ex Tax:24.92€