Menu
Your Cart
Welcome to the new Robomaa online store!

Servos

Brand: GWS Model: GWSVDNRTJ
The GWS Naro+D Micro Digital Servo Motor is compatible with standard RC systems. This servo’s sensitivity, locking position and rotation range can also be set using the GWS Digital Programming card. Servo motors come in various shape and size. They are designed for "closed feedback" systems because ..
16.60€
Ex Tax:13.23€
Brand: GWS Model: GWS03N/STD/F
The GWS Standard S03N STD Servo Motor is compatible with RC systems manufactured by Futaba, JR, Hitec, Airtronics (Sanwa), Multiplex and any systems using 1,5 ms neutral. It comes with Futaba connector (for special orders: contact us to request a specific connector). Servo motors come in various ..
12.75€
Ex Tax:10.16€
Brand: Olimex Model: OL-MS-1.3-9
Introduction: This generic sub-micro servo is one of the lightest servos we carry, weighing just 3.7 g (0.13 oz) without the lead. It is intended for use between 4.8 and 6 V (i.e. with 4- or 5-cell NiMH or NiCD battery packs). Servo horns and associated hardware are included. Key s..
5.97€
Ex Tax:4.76€
Brand: Olimex Model: OL-MS-R-1.3-9
Introduction: This generic sub-micro servo is one of the lightest servos we carry, weighing just 3.7 g (0.13 oz) without the lead. It is intended for use between 4.8 and 6 V (i.e. with 4- or 5-cell NiMH or NiCD battery packs). Servo horns and associated hardware are included. Di..
6.98€
Ex Tax:5.56€
Brand: Olimex Model: OL-MS-R-1.3-9-MG
Introduction: MS-R-1.3-9-MG is long lasting reliable servo motor with continuous rotation. With it's metal gears it's perfect for robot cars and projects where higher reliability is necessary. Features: Operating voltage 4.8-6V Motor Type: coreless motor Stall Torque: 1.8kg/cm(4.8V ),2...
9.06€
Ex Tax:7.22€
Brand: SpringRC Model: ROB10189
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. 1x..
15.08€
Ex Tax:12.02€
Brand: Sparkfun Model: ROB09347
Description: Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below i..
19.13€
Ex Tax:15.24€
Brand: Waveshare Model: W22414
Description: 30KG Serial Bus Servo, High precision and torque, with Programmable 360 Degrees Magnetic Encoder, Two-way Feedback, Servo/Motor Mode Switchable. Comes with cable.Note: though one channel UART is able to control up to 253 bus servos, due to the high power of the servos, it is necessary..
32.89€
Ex Tax:26.21€
Brand: DFRobot Model: SER0035
INTRODUCTION: This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application ..
27.23€
Ex Tax:21.69€
Brand: Pololu Model: POLO/3426
Description: The FS5115M is a standard-size analog servo from FEETECH that can deliver more than twice the torque of our standard-size servos with plastic gears thanks to its powerful motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo. Th..
26.21€
Ex Tax:20.89€
Brand: Olimex Model: OL-MS-6-40
Description:  The FS5106B is a general-purpose, low-cost standard analog servo. Features: Dimensions: 40.8 x 20.1 x 38 mm Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (7V) Stall Torque: 5kg.cm/69.56oz.in(4.8V), 6kg.cm/83.47oz.in(6V) Operating Voltage: 4.8V~6V Cont..
13.06€
Ex Tax:10.40€
Brand: Olimex Model: OL-MS-R-6-40
Description:  Standard analog continues rotation plastic gears servo 2BB. Features: Dimensions: 40.8 x 20.1 x 38 mm Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (7V) Stall Torque: 5kg.cm/69.56oz.in(4.8V), 6kg.cm/83.47oz.in(6V) Operating Voltage: 4.8V~6V Control Sy..
14.12€
Ex Tax:11.25€
Showing 1 to 12 of 16 (2 Pages)
Cookies
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.