Menu
Your Cart
Welcome to the new Robomaa online store!

7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800×480, Red / Black / White, SPI

7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800×480, Red / Black / White, SPI
7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800×480, Red / Black / White, SPI

Description: 7.5inch e-Paper E-Ink Display HAT (B) for Raspberry Pi, 800×480 pixels, Red / Black / White Three-Color, SPI Interface. Low power consumption, wide viewing angle, paper-like displaying without electricity.

Features:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

  • Operating Voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline Dimensions: 170.2 × 111.2mm
  • Display Size: 163.2 × 97.92mm
  • Dot Pitch: 0.205 × 0.204mm
  • Resolution: 800 × 480 pixels
  • Display Color: red, black, white
  • Grey Scale: 2
  • Full Refresh Time: 26s
  • Refresh Power: 48mW(typ.)
  • Standby Current: <0.01uA (almost none)
  • Viewing Angle: >170°

Documentation: Here

Write a review

Please login or register to review
Based on 0 reviews. - Write a review
80.50€
Ex Tax: 64.14€
Add to Cart
Ask Question
Add to Wish List

We also recommend

Quickview
2.13inch E-Paper E-Ink Display Module for Raspberry Pi Pico, 250×122, Black / White, SPI
2.13inch E-Paper E-Ink Display Module for Raspberry Pi Pico, 250×122, Black / White, SPI
Description: 2.13inch e-Paper E-Ink Display Module for Raspberry Pi Pico, 250×122 pixels, Black / White, SPI Interface Features: No backlight..
23.18€
Ex Tax:18.47€
Add to Cart
Add to Wish List
Quickview
2.9inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 296×128, Red / Black / White, SPI 2.9inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 296×128, Red / Black / White, SPI
2.9inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 296×128, Red / Black / White, SPI
Description: 2.9inch e-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 296×128 pixels, Red / Black / White, SPI Interface. Low power, wide viewi..
28.25€
Ex Tax:22.51€
Add to Cart
Add to Wish List
Quickview
4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels 4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels
4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels
Description: 4.01inch Colorful e-Paper E-Ink Display HAT for Raspberry Pi, 640×400 pixels, ACeP 7-Color, SPI Interface.Features: Advanced Color ..
76.62€
Ex Tax:61.05€
Add to Cart
Add to Wish List
Quickview
5.83" E-Ink Raw Display 600x448
5.83" E-Ink Raw Display 600x448
Description: This is an E-Ink raw display, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface. Due to the adva..
60.62€
Ex Tax:48.31€
Add to Cart
Add to Wish List
Quickview
648×480, 5.83inch E-Ink raw display, red/black/white three-color
648×480, 5.83inch E-Ink raw display, red/black/white three-color
Description: This is an E-Ink raw display, 5.83inch, 648×480 resolution, with embedded controller, communicating via SPI interface, supports red, ..
60.62€
Ex Tax:48.31€
Add to Cart
Add to Wish List

From the same brand

Quickview
1.8inch Colorful Display Module for micro:bit - 160x128
-23 %
1.8inch Colorful Display Module for micro:bit - 160x128
Description: This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors. ..
20.14€ 26.21€
Ex Tax:16.05€
Add to Cart
Add to Wish List
Quickview
Edge Breakout for micro:bit, I/O Expansion
Edge Breakout for micro:bit, I/O Expansion
Description: This is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use. Speci..
10.02€
Ex Tax:7.98€
Add to Cart
Add to Wish List
Quickview
Flex Cable for Raspberry Pi Camera - 60cm
Flex Cable for Raspberry Pi Camera - 60cm
Description: Raspberry Pi Camera Cable FFC 60cm. This cable is 600mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect f..
5.97€
Ex Tax:4.76€
Add to Cart
Add to Wish List
Quickview
GPS Magnetic Mount Antenna - 3m (SMA)
GPS Magnetic Mount Antenna - 3m (SMA)
Description: GPS External Antenna, Ceramics with Amplifier. Comes with IPX to SMA Adapter wire. Features(Ceramics): Center Frequency: 1575 ±1..
13.06€
Ex Tax:10.40€
Add to Cart
Add to Wish List
Quickview
IMX219 Camera Module - 160 FoV (8MP) IMX219 Camera Module - 160 FoV (8MP)
IMX219 Camera Module - 160 FoV (8MP)
Description: This is a camera module (without driver PCB) compatible with the official Raspberry Pi Camera Board V2, with 8-megapixel IMX219 sensor an..
18.12€
Ex Tax:14.44€
Add to Cart
Add to Wish List
Cookies
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.