![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-550x550.jpg)
![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-2-550x550.jpg)
![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-1-550x550.jpg)
![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-80x80.jpg)
![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-2-80x80.jpg)
![Universal e-Paper Raw Panel Driver HAT Universal e-Paper Raw Panel Driver HAT](https://robomaa.fi/image/cache/data/w13512-1-80x80.jpg)
None
Universal e-Paper Raw Panel Driver HAT
Description: This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare. e-Paper sold separately.
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications:
- Operating voltage: 3.3V~5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 65mm × 30.2mm
- Mounting hole size: 3.0mm
Interface:
- VCC: 3.3V-5V
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Susy status output, low active
Wiki : Wiki e-Paper_Driver_HAT
None
- Stock: 1
- Brand: Waveshare
- Model: W13512
13.06€
Ex Tax: 10.40€
Tags:
e-Paper