Brand: Pololu
Model: POLO/2862
Description: The MinIMU-9 v6 is an inertial measurement unit (IMU) that packs an
LSM6DSO 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis
magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses
nine independent rotation, acceleration, and magnetic measurements..
30.26€
Ex Tax:24.11€
Brand: Microbot
Model: MR003-010.1
Description: This carrier board has been developed for the Freescale MMA8451Q 3-axis accelerometer, a great low-g sensor with 14-bit digital output, I2C communication and adjustable sensitivity (±2g, ±4g or ±8g), and it includes all the external components required by the sensor.
Its very small s..
14.07€
Ex Tax:11.21€
Brand: Waveshare
Model: W24921
Description: This product is an industrial 16-ch relay module controlled via RS485 bus, adopts Modbus RTU protocol, built-in protection circuits such as power supply isolation, magnetical isolation, resettable fuse, and TVS diode, etc. It also comes with an ABS case.The Modbus RTU 16-Ch Relay is ver..
63.26€
Ex Tax:50.40€
Brand: Kitronik
Model: KT-5620
Description: This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power..
15.08€
Ex Tax:12.02€
Brand: Waveshare
Model: W15364
Description: The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Comes with RPi screws x 2.Features:Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi seri..
21.05€
Ex Tax:16.77€
Brand: Pololu
Model: POLO/5072
Description: The Motoron M3H550 Triple Motor Controller makes it easy to control DC
motors from a Raspberry Pi (Model B+ or newer) through an I²C interface.
Each module can independently control up to three motors, and multiple
Motoron boards can be stacked on top of the same Raspberry Pi for..
36.13€
Ex Tax:28.79€
Brand: Sparkfun
Model: ROB12089
Description: This is the Multi-Chassis Basic 4WD Kit, an easy to assemble and use robot chassis platform. The Multi-Chassis kit provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers. All you ..
46.46€
Ex Tax:37.02€
Brand: Sparkfun
Model: PRT14460
Description: This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack’s tactile switches are actually recessed into the housing so they don’t accidentally fall off during use. Each pack comes with one red b..
2.99€
Ex Tax:2.38€
New
Brand: Waveshare
Model: W21634
Nano Base Board (A) For CM4. Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.
Specifications:CM4 SOCKET: suitable for all variants of Compute Module 4CONNECTOR: Raspberry Pi 40PIN GPIO interface × 1USB: USB 2.0 Type A interface × 1CAMERA: MIPI CSI-2 port × 1 (15pi..
19.90€
Ex Tax:15.86€
New
Brand: Waveshare
Model: W21726
Nano Base Board (B) For CM4. Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.
Specifications:CM4 SOCKET: suitable for all variants of Compute Module 4NETWORKING: Gigabit Ethernet RJ45 connectorCONNECTOR: Raspberry Pi 40PIN GPIO header × 1USB: USB 2.0 Type A interf..
23.80€
Ex Tax:18.96€
Brand: Adafruit
Model: ADA-2856
DESCRIPTION: What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!
16 ultra bright smart LED NeoPixels are arranged in a circle with
1.75" (44...
22.90€
Ex Tax:18.25€
Brand: Olimex
Model: OL-MOD-RFID1356
Description: MOD-RFID1356MIFARE can read and write NFC / Mifare RFID tags operating at 13.56Mhz. MOD-RFID1356MIFARE uses NXP PN532 to read and write NFC / Mifare RFID cards. The board design features an additional second microcontroller to expands the ways to communicate with the host device - ..
28.24€
Ex Tax:22.50€