Brand: Waveshare
Model: W23116
Description: Mini Tower Kit For Raspberry Pi 4B, Desktop Computer Case, Strong Heat Dissipation, OLED Screen Display, Colorful LED.
Dedicated Mini Tower Kit for Raspberry Pi 4B, including ICE Tower Cooler, Mini Tower Case, 0.96inch OLED, and GPIO Edge Extension header. It can perfectly match your R..
70.75€
Ex Tax:56.37€
Brand: Waveshare
Model: W17419
Description: Compute Module Mini-computer.
NOTE: CM3 / CM3L / CM3+ / CM3+L Required!
The add-ons include: expansion board, metal case, power supply, and cooling fan. easily make a mini-computer if you happen to get a compute module Ideal choice for Raspberry Pi Compute Module, either study / e..
65.69€
Ex Tax:52.34€
-10 %
Brand: Waveshare
Model: W23926
Mini Base Board/Mini-Computer Advanced Version, Designed for Raspberry Pi Compute Module.CM4 Socket: suitable for all variants of Compute Module 4NETWORKING: Gigabit Ethernet RJ45 connectorCONNECTOR: M.2 M KEY, supports communication modules or NVME Solid State Drives + Raspberry Pi 40PIN GPIO heade..
45.81€ 50.90€
Ex Tax:36.50€
Brand: Pololu
Model: POLO/2862
Description: The MinIMU-9 v6 is an inertial measurement unit (IMU) that packs an
LSM6DSO 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis
magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses
nine independent rotation, acceleration, and magnetic measurements..
30.26€
Ex Tax:24.11€
Brand: Waveshare
Model: W24921
Description: This product is an industrial 16-ch relay module controlled via RS485 bus, adopts Modbus RTU protocol, built-in protection circuits such as power supply isolation, magnetical isolation, resettable fuse, and TVS diode, etc. It also comes with an ABS case.The Modbus RTU 16-Ch Relay is ver..
63.30€
Ex Tax:50.44€
Brand: Kitronik
Model: KT-5620
Description: This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power..
15.08€
Ex Tax:12.02€
Brand: Waveshare
Model: W15364
Description: The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Comes with RPi screws x 2.Features:Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi seri..
21.05€
Ex Tax:16.77€
Brand: Pololu
Model: POLO/5072
Description: The Motoron M3H550 Triple Motor Controller makes it easy to control DC
motors from a Raspberry Pi (Model B+ or newer) through an I²C interface.
Each module can independently control up to three motors, and multiple
Motoron boards can be stacked on top of the same Raspberry Pi for..
36.13€
Ex Tax:28.79€
New
Brand: DFRobot
Model: DFR0534
The Gravity MP3 Player Module has 8MB flash storage and supports MP3 and
WAV formats, operating within a 3.3V to 5V range. It features a UART
interface and supports sampling rates from 8kHz to 48kHz. The module can
emulate SPIFLASH to a USB drive, allowing for easy audio updates via a
USB fl..
13.10€
Ex Tax:10.44€
Brand: Sparkfun
Model: ROB12089
Description: This is the Multi-Chassis Basic 4WD Kit, an easy to assemble and use robot chassis platform. The Multi-Chassis kit provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers. All you ..
46.46€
Ex Tax:37.02€
Brand: Sparkfun
Model: PRT14460
Description: This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack’s tactile switches are actually recessed into the housing so they don’t accidentally fall off during use. Each pack comes with one red b..
2.99€
Ex Tax:2.38€
New
Brand: Waveshare
Model: W21634
Nano Base Board (A) For CM4. Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.
Specifications:CM4 SOCKET: suitable for all variants of Compute Module 4CONNECTOR: Raspberry Pi 40PIN GPIO interface × 1USB: USB 2.0 Type A interface × 1CAMERA: MIPI CSI-2 port × 1 (15pi..
19.90€
Ex Tax:15.86€