Brand: Pololu
Model: POLO/774
This little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. The a version with a black bezel is incorporated into our Orangutan and Orangutan LV-168 robot controllers, and this version is incorporated into our Orangutan SV-328 and 3pi ..
12.15€
Ex Tax:9.68€
Brand: Sparkfun
Model: PRT09518
Description: This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack.
Use this cable to battery-power any device that needs 9V and has an on-board barrel jack - it works great f..
4.90€
Ex Tax:3.90€
Brand: Pololu
Model: AStar/3103
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
22.16€
Ex Tax:17.66€
Brand: Pololu
Model: POLO/3145
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
32.29€
Ex Tax:25.73€
Brand: Pololu
Model: AStar/3102
Overview: The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the ..
22.16€
Ex Tax:17.66€
Brand: Pololu
Model: POLO/3108
Overview: The A-Star 32U4 Prime LV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient..
31.38€
Ex Tax:25.00€
-15 %
Brand: Pololu
Model: POLO/4008
Description: The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables effici..
36.91€ 43.42€
Ex Tax:29.41€
Brand: Pololu
Model: POLO/1182
The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microstepping bipolar stepper motor driver and is a drop-in replacement for the A4983 stepper motor driver carrier. The driver features adjustable current limiting, overcurrent protection, and five different m..
11.03€
Ex Tax:8.79€
Brand: Pololu
Model: POLO/2128
Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20..
19.13€
Ex Tax:15.24€
Brand: DFRobot
Model: DFR0270
Introduction: This Accessory Shield for Bluno is specially made for Bluno (BLE with Arduino Uno), which is first of its kind in intergrating BT 4.0(BLE) module into Arduino Uno. Together with Bluno, this Accessory Shield forms an ideal prototyping platform for both software and hardware developers t..
30.26€
Ex Tax:24.11€
Brand: Sparkfun
Model: BOB08882
Description: This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions.
..
12.25€
Ex Tax:9.76€
Brand: Pololu
Model: POLO/1187
This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional a..
12.15€
Ex Tax:9.68€