New
Brand: Seeedstudio
Model: 103030356
Seeed Studio XIAO Expansion Board is a powerful functional expansion board forSeeed Studio XIAO series
of only half Raspberry Pi 4 size. It enables building prototypes and
projects in an easy and quick way. With its rich peripherals, you could
explore the infinite possibilities of Seeed Studio..
24.19€
Ex Tax:19.27€
Brand: Pimoroni
Model: PIM082
Description: Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.
It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projects
Great for little robot..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: PRT16763
Description: This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board i..
2.73€
Ex Tax:2.18€
Brand: Pololu
Model: POLO/3426
Description: The FS5115M is a standard-size analog servo from FEETECH that can deliver more than twice the torque of our standard-size servos with plastic gears thanks to its powerful motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo. Th..
26.21€
Ex Tax:20.89€
Brand: Sparkfun
Model: COM13716
Description: This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is base..
10.07€
Ex Tax:8.02€
New
Brand: DFRobot
Model: DFR0928
This ST7735S 1.8" TFT Display features a resolution of 128×160 and
SPI (4-wire) communication. Integrated with an SD card slot, it allows
to easily read full-color bitmaps from the SD card.
The module provides users with two wiring methods: pin header
wiring and GDI (General Display interface..
11.34€
Ex Tax:9.03€
Brand: DFRobot
Model: SEN0343
Description: This high-resolution differential pressure breakout board with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance MEMS pressure chip and a special conditioning chip are encapsulated inside the sensor. It will give you a comp..
50.50€
Ex Tax:40.24€
Brand: DFRobot
Model: DFR0654
Description: FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.
It supports WiFi and Bluetooth dual-mode communication and features a small size, ultra-low power consumption, on-board charging circuit, and easy-to-use interface, w..
16.09€
Ex Tax:12.82€
Brand: DFRobot
Model: DFR0654-F
Description: FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.
It supports WiFi and Bluetooth dual-mode communication and features a small size, ultra-low power consumption, on-board charging circuit, and easy-to-use interface, w..
17.10€
Ex Tax:13.63€
Brand: DFRobot
Model: DFR0498
Introduction: DFRobot FireBeetle series are low power consumption development modules designed for Internet of Things (IoT). The FireBeetle Covers-Camera & Audio Media Board is a multimedia device for IoT that provides interfaces to connect NAU8822 CODEC IIS, OV7725 camera, SD card (SDIO), earph..
25.20€
Ex Tax:20.08€
Brand: DFRobot
Model: DFR0478
Description: DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. The electric cu..
15.08€
Ex Tax:12.02€
Brand: DFRobot
Model: DFR0489
Description: DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC and multiple interfaces such as HSPI, UART, PWM, I2C and I2S. In DTIM10,..
11.03€
Ex Tax:8.79€