Model: DFR0191
INTRODUCTION: NEW VERSION! This is the upgraded DFRduino Mega 2560 V3.0 which is now fully compatible with Arduino Mega 2560 R3. The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UART..
50.50€
Ex Tax:40.24€
New
Brand: Waveshare
Model: W11092
This is a calibrated digital temperature and humidity module with
onboard sensor DHT22, which features higher accuracy and wider measuring
range than DHT11.
It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications:Temperature:Resol..
12.85€
Ex Tax:10.24€
Brand: DFRobot
Model: SEN0192
INTRODUCTION: The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is sensitive to a variety of objects that are microwave-reflective, and its sensor readings are not affected by th..
20.14€
Ex Tax:16.05€
New
Brand: DFRobot
Model: FIT0449
This speaker module is based on the 8002 speaker amplifier IC. It can be
used as a buzzer and also play high quality audio. Volume output is
controlled via the potentiometer.The module has various advantages (e.g. a compact footprint, simple
interface, wide voltage input range, long service li..
8.00€
Ex Tax:6.37€
Brand: Olimex
Model: OL-SNS-DH11
Description: The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires carefu..
7.03€
Ex Tax:5.60€
Brand: Italtronic
Model: RM-RPI3-DIN2
Description: Enclosure for Raspberry Pi 3 - DIN Rail Mounting.
Enclosure material ABS
Body colour grey
Dimension X 71.1mm
Dimension Y 90 mm
Dimension Z 32.2 mm
Mounting for DIN rail mounting..
22.16€
Ex Tax:17.66€
Brand: Italtronic
Model: RM-RPI3-DIN1
Description: Enclosure for Raspberry Pi 3 - DIN Rail Mounting.
Enclosure material ABS
Body colour grey
Dimension X 71.3mm
Dimension Y 90.5mm
Dimension Z 62mm
Mounting for DIN rail mounting..
18.12€
Ex Tax:14.44€
Brand: Waveshare
Model: W26682
This ABS enclosure is designed to be mounted on a DIN Rail. The Raspberry Pi 5 is fixed to the backplate with two screws and then the cover can be clicked into place. The case provides space for expansion boards and has a cutout with a transparent panel on the front. This can be used to place a scre..
12.04€
Ex Tax:9.60€
Brand: Waveshare
Model: W15220
Description: This driver board gives your micro:bit the ability to drive two channel DC motors and three channel servos. It's an ideal choice for you to DIY mobile robots
Features:
micro:bit edge connector, directly pluggable
2x DC motor interfaces, 3x servo interfaces
Integrates 5V reg..
24.19€
Ex Tax:19.27€
Brand: Devantech
Model: ETH-dS1242
Customise your own module using our powerful dScript language! Using our editor you can now add your own features and controls to our modules:
Create a custom webpage - Add your own logo, buttons and functionality
Add a tcp server - Respond to incoming tcp requests with your own functions
..
79.96€
Ex Tax:63.71€
Brand: Devantech
Model: ETH-dS2242
Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus protocols. Send email notifications on selected events. Optional AES encryption for totally secure control using binary tcp/ip m..
80.66€
Ex Tax:64.27€
Brand: Devantech
Model: ETH-dS2824
Customise your own module using our powerful dScript language! Using our editor you can now add your own features and controls to our modules:
Create a custom webpage - Add your own logo, buttons and functionality
Add a tcp server - Respond to incoming tcp requests with your own functions
..
204.25€
Ex Tax:162.75€