Brand: Onion
Model: DEV14436
Description: The Breadboard Dock brings breadboard compatibility to the Onion Omega, mapping all of its pins to a standard 0.1" spacing, allowing you to access all of the Omega’s IOs in your breadboard project. Due to the Omega’s 2mm pin spacing, this dock is about as close as you can get to pl..
14.07€
Ex Tax:11.21€
Brand: DFRobot
Model: FIT0154
Description: This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable has an approximate 210mm lenght.Each pack comes with ten jumper cables(different colors available). These jumper cables are perfect f..
6.02€
Ex Tax:4.80€
Brand: Devantech
Model: BT004BLE
Description: Controlled over Bluetooth using simple binary or ASCII commands.
Relays - 4
Power - 12V DC adaptor, supplied separately.
Relay current - Up to 16Amp @24vdc or 250vac
Connections - Screw Terminals for N/O N/C and Common contacts.
The BT004BLE is ideal for connection to And..
63.66€
Ex Tax:50.73€
Brand: Sparkfun
Model: COM18375
Description: This is a high grade DC Buck converter that inputs 8 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that need to power a USB or 5V device even while the input is varying (batte..
19.13€
Ex Tax:15.24€
Brand: Sparkfun
Model: COM18732
Description: This is an industrial grade DC Buck-Boost converter that inputs 8V to
36V and outputs 12V up to 6A or 72W. With plenty of heatsinking and
protection, this DC block is perfect for battery applications (such as
SLAs or LFPs) that need to power a steady load (such as 12V router and
..
19.74€
Ex Tax:15.73€
Brand: Sparkfun
Model: COM07835-S
Description: This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display ..
59.71€
Ex Tax:47.58€
Brand: Pimoroni
Model: PIM301
Description: Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible!
Our SHIM-format boards are designed to be soldered neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female hea..
11.03€
Ex Tax:8.79€
Brand: DFRobot
Model: SEN0173
Description: The camera for Raspberry Pi can be used to take high-definition video, as well as stills photographs. It’s easy to use for beginners, but has plenty to offer advanced users if you’re looking to expand your knowledge. There are lots of examples online of people using it for time-lap..
30.26€
Ex Tax:24.11€
Brand: DFRobot
Model: SEN0318
Description: Gravity: CCS811 Air Quality Sensor can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Organic Compounds) density. It can be widely used in many applications, such as air quality detection, air purifiers, ventilation system and so on. This CCS811 air quality se..
18.02€
Ex Tax:14.36€
Brand: Waveshare
Model: W23508
Description: CM4 To Pi 4B Adapter for Raspberry Pi, Alternative Solution for Raspberry Pi 4B. CM4 or Core3566 is optional.Need a Pi4B with eMMC function while the TF card is not very stable? This adapter is designed for youIf you need 4-ch USB3.0 and dislike the slow USB2.0 interface, you can choose..
35.32€
Ex Tax:28.15€
-13 %
Brand: Waveshare
Model: W24009
Description: Mini Base Board/Mini-Computer Full Version, Designed for Raspberry Pi Compute Module 4.Note: CM4 and antenna are NOT included.
Specifications:CM4 socket: suitable for all variants of Compute Module 4Networking: Gigabit Ethernet RJ45 connector, M.2 M KEY, supports communication modules ..
55.56€ 63.66€
Ex Tax:44.27€