Brand: Sparkfun
Model: COM15350
Description: If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in one of those "talking greeting cards".
Documents:
Datasheet
..
1.97€
Ex Tax:1.57€
Brand: Sparkfun
Model: PGM11801
Description: The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That’s right, now you can shrink your Arduino projects down to “tiny size” by moving your code straight over to these small but capable ICs. The standard method for programming ..
24.20€
Ex Tax:19.28€
Brand: Sparkfun
Model: SEN10988
Description: The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any external calibration to provide typical accuracies of..
2.35€
Ex Tax:1.87€
Brand: Sparkfun
Model: COM09276
Description: This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.
Dimensions: 0.5 x 0.55 x 1.45"
Documents: Dimensional Drawing..
2.53€
Ex Tax:2.02€
Brand: Sparkfun
Model: COM11137
Description: This heavy-duty, 3-pole, double throw toggle switch is rated for up to 15 Amps of current. It can be panel mounted with a 7/16" hole.
Features:
Max Current: 15A
Max Voltage: 250VAC
Function: ON-OFF-ON
7/16" Mounting Diameter..
3.24€
Ex Tax:2.58€
Brand: Sparkfun
Model: COM09806
Description: There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at SparkFun, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot! Perfect for your next LC..
1.80€
Ex Tax:1.43€
Brand: Sparkfun
Model: SEN11028
Description: The MPU-6050 is a serious little piece of motion processing tech! By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does ..
40.38€
Ex Tax:32.18€
Brand: Sparkfun
Model: SEN09269
Description: Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensin..
26.52€
Ex Tax:21.13€
Brand: Sparkfun
Model: SEN09836
Description:
This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to..
30.57€
Ex Tax:24.35€
Brand: Sparkfun
Model: SEN11446
Description: We've been using and selling Analog Devices' ADXL accelerometers for a good while now, and now we've found another great part in the series! The ADXL362 is a complete 3-axis acceleration measurement system that operates at extremely low power consumption levels. It measures both dynamic..
15.28€
Ex Tax:12.18€
Brand: DFRobot
Model: DFR0143
Introduction: The MMA7361 from Freescale is a very nice sensor with easy analog interface. The MMA7361 is a 3.3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). It has selectable sensitiv..
18.32€
Ex Tax:14.60€
Brand: Sparkfun
Model: SEN10530
Description: This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done through an I2C interface. There is no on-board regulator, so a regulated voltage of 2.16-3.6VDC should be supplied.
The breakout board includes the HMC5..
18.72€
Ex Tax:14.92€