Brand: Sparkfun
Model: COM08861
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
515-520nm Green
3.0-3.4VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
16,000-22,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM11118
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
3.0-3.4VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
16,000-20,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM11119
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
2.1-2.3VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
10,000-12,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM00746
Description: Yes you read that correctly - 10Farad capacitor. This small cap can be charged up and then slowly dissapated running an entire system for hours. Combine two in series for 5F/5V. Do not over voltage or reverse polarize these capacitors.
Documents: 10F Super Cap Datasheet
Dimensions..
5.06€
Ex Tax:4.03€
Brand: Sparkfun
Model: COM19102
Description: Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook it up to an audio source and press it..
32.39€
Ex Tax:25.81€
Brand: Olimex
Model: OL-SOMA20-n8GB
Descipriotn: A20-SOM is System on Chip module, which contains A20 Dual Core Cortex-A7 processor, Power managment Unit AXP209, 1GB DDR3 memory and 8GB NAND Flash. All A20 signals are available on 6 connectors x 40 pin with 0.05" step. A20-SOM have UART console connector and SD-card.
Reference desi..
62.75€
Ex Tax:50.00€
Brand: Sparkfun
Model: ROB12075
Description: T'Rex doesn't want to be fed, he wants to hunt! The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the..
76.82€
Ex Tax:61.21€
Brand: Sparkfun
Model: COM10302
Description: These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total of 12 buttons. The colored caps are removable and the buttons fit into breadboards. See the drawing below for exact dimensions.
Documents:
..
8.81€
Ex Tax:7.02€
Brand: Pololu
Model: POLO/1932
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors..
3.64€
Ex Tax:2.90€
Brand: Pololu
Model: POLO/1933
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors..
3.64€
Ex Tax:2.90€
Brand: Pololu
Model: POLO/2172
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads wit..
2.63€
Ex Tax:2.10€
Brand: Pololu
Model: POLO/2173
This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripp..
2.63€
Ex Tax:2.10€