Brand: Pololu
Model: POLO/1405
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the 15.6mm (0.61") lever arm has a semicircular bump at the tip that simulates a roll..
2.33€
Ex Tax:1.85€
Brand: Pololu
Model: POLO/1404
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the 16.3mm (0.64") lever arm has a roller at the tip. This three-pin switch can also ..
2.43€
Ex Tax:1.94€
Brand: Pololu
Model: POLO/1402
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the lever arm is 16.7 mm (0.66") long. This three-pin switch can also be used as a tw..
2.33€
Ex Tax:1.85€
Brand: Pololu
Model: POLO/1403
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch, but the 2"-long lever arm makes it especially useful as a simple tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the lever arm is 50 mm..
2.43€
Ex Tax:1.94€
Brand: Sparkfun
Model: PRT12702
Description: This is the Mini Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering..
5.26€
Ex Tax:4.19€
Brand: Sparkfun
Model: ROB11015
Description: Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 6mm and 2 M2 mounting holes on the body.
Th..
7.49€
Ex Tax:5.97€
Brand: Sparkfun
Model: BOB13601
Description: Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital ..
7.59€
Ex Tax:6.05€
Brand: Sparkfun
Model: SEN11084
Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface ..
21.15€
Ex Tax:16.85€
Brand: Sparkfun
Model: WRL12849
Description: The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system for your car or remote control your media center. With this breakout board we’ve made it easy for you to drop it into any project you could use it for. All pertin..
50.50€
Ex Tax:40.24€
Brand: Sparkfun
Model: PRT13777
Description: The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project running safely and extensively.
The Battery Babysitter features a pair o..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: WRL13019
Description: This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakout board, in that nearly every pin on the on-board BC118 module is made available to access. This board is actually a close cousin to our Gold and Silver ..
35.32€
Ex Tax:28.15€
Brand: Sparkfun
Model: CEL13120
Description: The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet access nearby. The ZTE MG2639 module, which this shield is built around, supports SMS, TCP, UDP, and can even be used to make or receive phone cal..
80.92€
Ex Tax:64.48€