Brand: Elecfreaks
Model: EF02009
Description: RPI GSM Adapter is an adapter which accomplished communication by the direct connection between Raspberry Pi GPIO and the GSM/GPRS Module-EFCom Pro. We designed two GPIO interfaces in parallel connection，therefore, RPI GSM Adapter can not only connect to Raspberry Pi GPIO, but also conn..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: DFR0258
INTRODUCTION: This RS232 shield is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 headers will facilitate your connections and commiss..
19.94€
Ex Tax:15.89€
Brand: Sparkfun
Model: DEV13029
Description: As you know, the Arduino micro controller only has a USB port and a TTL UART interface, so if you need an RS232 port directly connected to your Arduino, look no further than the RS232 Shield.
The RS232 serial port used to be the standard connection for most peripheral ports on PCs, b..
18.02€
Ex Tax:14.35€
Brand: Microbot
Model: MR002-001.2
Description: This board is usefull to connect your PC to any digital board that uses a serial port with 3.3V or 5V level. Using a MAX3232C transceiver, this serial adapter can operate with 3,3V and 5V digital signals (it also accepts 5V logic inputs with 3,3V supply).
It meets the requirements of..
11.54€
Ex Tax:9.19€
Brand: Devantech
Model: SCR02
Autonomous operation from direct sensor input.
Free configuration utility to setup the SCR02 sensor type and operating mode.
0-5v analogue inputs or direct connection to ultrasonic rangers.
Number of Relay's - 2
Power - 12V DC supplied separately.
Configuration interface - USB Mini
..
47.97€
Ex Tax:38.23€
Brand: Seeedstudio
Model: COM101B8B
Description: This Passive Piezoelectric Type Buzzer is made of plastic, very eye catching colors. It can generate sound over 110DBA(!), so do not make it close to your ears when you test the buzzer. Includes build-in signal generator, just power on 6-12V and it will scream out loud.
Caution: may..
10,119.96€
Ex Tax:8,063.71€
Brand: DFRobot
Model: DFR0060
Introduction
The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secu..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: PRT08084
Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit stand..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT08235
Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit stand..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT08432
Description: Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT08433
Description: Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with..
1.01€
Ex Tax:0.81€