Brand: Sparkfun
Model: COM09288
Description: An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to..
1.85€
Ex Tax:1.47€
Brand: Sparkfun
Model: COM13253/13099
Description: (Switch) This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch, this model is much more robust and capable of handling larger currents and voltages.
With a max voltage rating of 125VAC at 0.3A an..
6.98€
Ex Tax:5.56€
Brand: Dagu Electronics
Model: RS011
Unique and powerful 4WD tracked chassis
Adjustable clearance
Stretchy rubber treads
Comes with four motors and encoders
Speed: 1Km/hr
The Dagu Rover 5 4WD Tracked Chassis w/ Settable Ground Clearance is a unique and powerful tracked chassis. Unlike conventional tracked chassis you can a..
80.87€
Ex Tax:64.44€
Brand: DFRobot
Model: FIT0058
Introduction
The mounting plate for RP5 tracked chassis is a high strength, non-friable, non-conductive, and designed to fit a variety of sensors, controllers, power switch, charging socket mounting holes, including GP2D12 bracket, infrared switch bracket, Arduino, Romeo, MEGA and other control..
10.12€
Ex Tax:8.06€
Brand: Elecfreaks
Model: EF02009
Description: RPI GSM Adapter is an adapter which accomplished communication by the direct connection between Raspberry Pi GPIO and the GSM/GPRS Module-EFCom Pro. We designed two GPIO interfaces in parallel connection，therefore, RPI GSM Adapter can not only connect to Raspberry Pi GPIO, but also conn..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: DFR0258
INTRODUCTION: This RS232 shield is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 headers will facilitate your connections and commiss..
19.94€
Ex Tax:15.89€
Brand: Sparkfun
Model: DEV13029
Description: As you know, the Arduino micro controller only has a USB port and a TTL UART interface, so if you need an RS232 port directly connected to your Arduino, look no further than the RS232 Shield.
The RS232 serial port used to be the standard connection for most peripheral ports on PCs, b..
18.02€
Ex Tax:14.35€
Brand: Microbot
Model: MR002-001.2
Description: This board is usefull to connect your PC to any digital board that uses a serial port with 3.3V or 5V level. Using a MAX3232C transceiver, this serial adapter can operate with 3,3V and 5V digital signals (it also accepts 5V logic inputs with 3,3V supply).
It meets the requirements of..
11.54€
Ex Tax:9.19€
Brand: Devantech
Model: SCR02
Autonomous operation from direct sensor input.
Free configuration utility to setup the SCR02 sensor type and operating mode.
0-5v analogue inputs or direct connection to ultrasonic rangers.
Number of Relay's - 2
Power - 12V DC supplied separately.
Configuration interface - USB Mini
..
47.97€
Ex Tax:38.23€
Brand: Seeedstudio
Model: COM101B8B
Description: This Passive Piezoelectric Type Buzzer is made of plastic, very eye catching colors. It can generate sound over 110DBA(!), so do not make it close to your ears when you test the buzzer. Includes build-in signal generator, just power on 6-12V and it will scream out loud.
Caution: may..
10,119.96€
Ex Tax:8,063.71€
Brand: DFRobot
Model: DFR0060
Introduction
The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secu..
11.03€
Ex Tax:8.79€