Brand: Pololu
Model: Wire/1801
These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1..
11.44€
Ex Tax:9.11€
Brand: Sparkfun
Model: DEV12587
Description: Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connec..
24.19€
Ex Tax:19.27€
Brand: Sparkfun
Model: DEV12640
Description: Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connec..
24.19€
Ex Tax:19.27€
Brand: Sena Technologies
Model: SEN02093+01761
The ProBee-ZU10 is an ZigBee USB adapter with integrated ZigBee core and radio/antenna circuits together with high level software library.
The ZU10 USB Adapter is designed to meet specific requirements of low cost and low power wireless applications such as home automation and smart energy by adop..
81.68€
Ex Tax:65.08€
Brand: DFRobot
Model: DFR0131
Introduction
Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping.
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can..
17.10€
Ex Tax:13.63€
Brand: Olimex
Model: OL-PROTOS
Description: This is a prototype shield for MAPLE, PINGUINO, ARDUINO like boards, it has a sea of 0.1" pads with easy access to +vcc and gnd around each pad.
Features:
Stackable headers
Two buttons
Two leds
Prototype PTH area
SMD IC area
Filter capacitors
4 mount holes make boar..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: DEV09729
Description: The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset but..
16.09€
Ex Tax:12.82€
Brand: Pololu
Model: POLO/751
Introduction
The Pololu Pushbutton Power Switch is a compact, solid-state power switch controlled by a momentary pushbutton switch. Because the switched current does not flow through the mechanical switch, a large variety of small, low-power switches can be used to control a substantial amount of..
4.05€
Ex Tax:3.23€
Brand: Pololu
Model: PowerSwitch/750
Introduction
The Pololu Pushbutton Power Switch is a compact, solid-state power switch controlled by a momentary pushbutton switch. Because the switched current does not flow through the mechanical switch, a large variety of small, low-power switches can be used to control a substantial amount of..
4.05€
Ex Tax:3.23€
Brand: Sparkfun
Model: DEV10615
Description: This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ..
22.47€
Ex Tax:17.90€
Brand: Pololu
Model: POLO/2456
Description: This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, allowing this array to be used as a minimal detector for a line-following robot. Each sensor provides a separate analog voltage output.
Functio..
10.02€
Ex Tax:7.98€
Brand: Pololu
Model: POLO/2457
Description: This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, allowing this array to be used as a minimal detector for a line-following robot. Each sensor provides a separate digital I/O-measurable voltage ou..
10.02€
Ex Tax:7.98€