Brand: Pololu
Model: OrangSV-328/1227
Want to build a small robot that doesn’t look like a PCB on wheels? The Orangutan is small enough for integrating into a small robot, rather than being the small robot. With Atmel’s powerful ATmega328P AVR microcontroller, motor drivers, buttons, display, and buzzer, all you need to add is your own ..
67.30€
Ex Tax:53.63€
Brand: Pololu
Model: POLO/3150
Overview: The Pololu P-Star 25K50 Micro is a general-purpose programmable module based on Microchip’s PIC18F25K50 microcontroller, which has 32 KB of flash program memory, 2 KB of RAM, and built-in USB functionality. Onboard features of the P-Star (abbreviated P*) include a 16 MHz crystal, a USB Mic..
13.06€
Ex Tax:10.40€
Brand: DFRobot
Model: FIT0004
Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware.
It supports
Hitec 422
Hitec 311
...
.....
15.28€
Ex Tax:12.18€
Brand: Adafruit
Model: ADA-937
This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box. The jack half has two mounting 'ears' with M3 screws installed, ~1.1" / ~29mm apart. Can be used wit..
6.02€
Ex Tax:4.80€
Brand: Sparkfun
Model: CAB10759
Description: Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it's hard to get power to your Ethernet devices. Wouldn't it be convenient to use the same cable for power and data? Using ..
6.98€
Ex Tax:5.56€
Brand: Microbot
Model: MR007-004.2
Description: The PCB Proto Shield MEGA for Arduino makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project. It has got extra connections for all of the Arduino I/O pins and it has got space to mount through-hole and surface mount integrate..
6.98€
Ex Tax:5.56€
Brand: Microbot
Model: MR007-003.2
Description
The PCB Proto Shield UNO for Arduino makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project. It has got extra connections for all of the Arduino I/O pins and it has got space to mount through-hole and surface mount integrat..
4.05€
Ex Tax:3.23€
Brand: Seeedstudio
Model: SEN130A3B
This is a reflective sensor combines a GaA1As infrared light emitting diode with a high sensitive Darlington phototransistor in a mini package.
Features:
Compact
High performance
High output
Easy to mount on PCB
Widely applicable
Applications
Timing sensors
Edge sensors..
4.05€
Ex Tax:3.23€
Brand: MikroElektronika
Model: ME-1879
Description: Pi 2 click shield is an extension for Raspberry Pi® models 2B and B+. Compared to the original Pi click™ shield, this one conforms to the expanded pinout of newer Raspberry Pi models. The Raspberry Pi 2 B has a quad-core ARM® Cortex®-A7 with six times the performance of the original Pi...
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: KIT13091
Description: This is the SparkFun Pi Wedge B+, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+, and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decoupling capacitors on the power supply lines. The “Wedge” also makes th..
10,119.96€
Ex Tax:8,063.71€
Brand: Raspberry Pi
Model: PFace2-Control
Introduction: PiFace Control and Display 2 Unshackle your Raspberry Pi from its keyboard, mouse and monitor! With PiFace™ Control & Display you can put your Raspberry Pi where you would never think possible. Saves space and power by removing the need for a monitor, yet still providing a user int..
46.46€
Ex Tax:37.02€
Brand: Sparkfun
Model: SEN13285
Description: This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.
This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire ..
13.06€
Ex Tax:10.40€