Brand: Olimex
Model: OL-NANO
Description: Open source hardware wearable Arduino Leonardo-like development board.
Faetures:
ATMEGA32U4 Arduino Leonardo compatible
Works with Arduino IDE
Micro USB cable connector (unlike most of the other Olimex boards which use mini USB)
User button
Reset button
Micro SD card ..
19.13€
Ex Tax:15.24€
Brand: Olimex
Model: OL-NANO-BAT
Description: Open source hardware power supply for wearable Arduino Leonardo like development board
Features:
Stacks on top of OLIMEXINO-NANO
LiPo battery charger
LiPo connector
Lithium 3V battery
Switch for selecting battery power (switch off battery if necessary)..
9.01€
Ex Tax:7.18€
Brand: Olimex
Model: OL-NANO-GSM
Description: GSM/GPRS/Bluetooth 3.0 shield for OLIMEXINO-NANO with SIM800H quad band module
OLIMEXINO-NANO-GSM is a GSM/GPRS/Bluetooth 3.0 shield for OLIMEXINO-NANO with the SIM800H quad band module. It allows OLIMEXINO-NANO to place and take GSM calls, to send and receive SMS and to send and rec..
33.30€
Ex Tax:26.53€
Brand: Olimex
Model: OL-STM32
Description: ARDUINO / MAPLE like board with STM32F103RBT6
FEATURES:
STM32F103RBT6 microcontroller
DCDC power supply allow power input voltage from 9 to 30V DC thus making possible to take virtually any power supply adapter on the market, also enable application which are in industrial po..
30.26€
Ex Tax:24.11€
Brand: Seeedstudio
Model: SEN08011P
This 2m long One Wire Temperature Sensor has a waterproof probe and long wire shape, suitable for immersive temperature detection. The chip inside this sensor is the widely adopted DS18B20. For convenience, we suggested some resources at the bottom. But you can still find tons of resources with a qu..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: COM11644
Description: OpenSegment makes it easy to add a large 7-segment display to your project. Because larger 7-segment displays pull more power than a microcontroller is able to drive directly, the OpenSegment has 8 PNP and 4 NPN transistors in order to drive the segments at their maximum brightness!
..
19.94€
Ex Tax:15.89€
Brand: Sparkfun
Model: COM11648
Description: OpenSegment makes it easy to add a large 7-segment display to your project. Because larger 7-segment displays pull more power than a microcontroller is able to drive directly, the OpenSegment has 8 PNP and 4 NPN transistors in order to drive the segments at their maximum brightness!
..
19.94€
Ex Tax:15.89€
Brand: Sparkfun
Model: ROB09014
Description: This is our version of the OpenServo open-source servo controller board. It's meant to replace the existing controller board in any standard servo (~.78 inch servo width). With this board you can control a servo entirely with I2C/TWI commands rather than PWM, meaning that multiple OpenS..
18.32€
Ex Tax:14.60€
Brand: Pololu
Model: OrangSV-328/1227
Want to build a small robot that doesn’t look like a PCB on wheels? The Orangutan is small enough for integrating into a small robot, rather than being the small robot. With Atmel’s powerful ATmega328P AVR microcontroller, motor drivers, buttons, display, and buzzer, all you need to add is your own ..
67.30€
Ex Tax:53.63€
Brand: Pololu
Model: POLO/3150
Overview: The Pololu P-Star 25K50 Micro is a general-purpose programmable module based on Microchip’s PIC18F25K50 microcontroller, which has 32 KB of flash program memory, 2 KB of RAM, and built-in USB functionality. Onboard features of the P-Star (abbreviated P*) include a 16 MHz crystal, a USB Mic..
13.06€
Ex Tax:10.40€
Brand: DFRobot
Model: FIT0004
Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware.
It supports
Hitec 422
Hitec 311
...
.....
15.28€
Ex Tax:12.18€
Brand: Adafruit
Model: ADA-937
This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box. The jack half has two mounting 'ears' with M3 screws installed, ~1.1" / ~29mm apart. Can be used wit..
6.02€
Ex Tax:4.80€