Brand: Sparkfun
Model: COM08860
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
465-470nm Blue
3.0-3.4VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
8,000-10,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM08861
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
515-520nm Green
3.0-3.4VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
16,000-22,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM11118
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
3.0-3.4VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
16,000-20,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: COM11119
Description: Huge 10mm through hole LEDs. Mood-light an entire wall!
Features:
2.1-2.3VDC Forward Voltage
80mA Forward Current
30 degree viewing angle
10,000-12,000 MCD output
Documents: Datasheet..
2.28€
Ex Tax:1.81€
Brand: Microbot
Model: MR400-012.1C
Description: 4-Digit Serial LED Display YELLOW digit. 7-segment LED displays are used in many projects to visualize informations; their use is simple as lighting a LED, but it should be complicated because of the need to manage a lot of interface signals to organize more than a digit at the same tim..
16.09€
Ex Tax:12.82€
-20 %
Brand: Pololu
Model: POLO/2535
These LED (5mm) 10-packs are an easy way to add colorful and complex lighting
effects to a project. Each RGB LED contains an integrated WS2811 driver
that allows it to be controlled with a high-speed one-wire interface
(see the bottom of this page for sample code, including an Arduino
libra..
7.28€ 9.10€
Ex Tax:5.80€
-20 %
Brand: Pololu
Model: POLO/2536
These LED (8mm) 10-packs are an easy way to add colorful and complex lighting
effects to a project. Each RGB LED contains an integrated WS2811 driver
that allows it to be controlled with a high-speed one-wire interface
(see the bottom of this page for sample code, including an Arduino
libra..
7.28€ 9.10€
Ex Tax:5.80€
Brand: Sparkfun
Model: COM07835-S
Description: This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display ..
59.71€
Ex Tax:47.58€
Brand: Pimoroni
Model: PIM301
Description: Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible!
Our SHIM-format boards are designed to be soldered neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female hea..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: COM13716
Description: This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is base..
10.07€
Ex Tax:8.02€
Brand: Sparkfun
Model: DEV14012
Description: This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively ..
4.35€
Ex Tax:3.47€
Brand: Sparkfun
Model: DEV14011
Description: This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively..
4.35€
Ex Tax:3.47€