Brand: Pololu
Model: POLO/2503
Overview: This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, brushed DC motors with an Arduino or Arduino clone. The board features a pair of Freescale MC33926 motor drivers, which operate from 5 to 28 V and can deliver a continuous 3 A per chan..
37.75€
Ex Tax:30.08€
Brand: Sparkfun
Model: DEV10618
Description: This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
The board provides 6 PWM outputs via screw terminals. Check the data..
24.49€
Ex Tax:19.52€
Brand: DFRobot
Model: DFR0105
Introduction: Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and other non-standard components. With this shield, your Arduino now have one power..
22.47€
Ex Tax:17.90€
Brand: DFRobot
Model: DFR0131
Introduction
Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping.
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can..
17.10€
Ex Tax:13.63€
Brand: Olimex
Model: OL-PROTOS
Description: This is a prototype shield for MAPLE, PINGUINO, ARDUINO like boards, it has a sea of 0.1" pads with easy access to +vcc and gnd around each pad.
Features:
Stackable headers
Two buttons
Two leds
Prototype PTH area
SMD IC area
Filter capacitors
4 mount holes make boar..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: DEV09729
Description: The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset but..
16.09€
Ex Tax:12.82€
Brand: Sparkfun
Model: DEV10615
Description: This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ..
22.47€
Ex Tax:17.90€
Brand: Sparkfun
Model: DEV13216
Description: This is the RFduino CR2032 Coin Battery Shield, a small add-on board for the RFduino DIP module that supplies 2-3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout your boards.
The CR2032 C..
23.18€
Ex Tax:18.47€
Brand: Sparkfun
Model: DEV10406
Description: This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure..
17.10€
Ex Tax:13.63€
Brand: Sparkfun
Model: DFR0258
INTRODUCTION: This RS232 shield is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 headers will facilitate your connections and commiss..
19.94€
Ex Tax:15.89€
Brand: Sparkfun
Model: DEV13029
Description: As you know, the Arduino micro controller only has a USB port and a TTL UART interface, so if you need an RS232 port directly connected to your Arduino, look no further than the RS232 Shield.
The RS232 serial port used to be the standard connection for most peripheral ports on PCs, b..
18.02€
Ex Tax:14.35€
Brand: DFRobot
Model: DFR0060
Introduction
The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secu..
11.03€
Ex Tax:8.79€