Brand: Pololu
Model: POLO/1400
These small, two-pin, SPST momentary pushbuttons are intended for mounting to PCBs, but they can also be plugged into standard 0.1" breadboards as shown in the picture below. Note that this button should not be used with voltages above 12 V, and it should not be used to switch currents greater than ..
1.97€
Ex Tax:1.57€
Brand: Pololu
Model: POLO/1408
These small single-pole, double-throw (SPDT) slide switches are rated for 300 mA at 50 VDC and make great on/off power switches for low power electronics. They can also be used as a convenient way to choose between two analog or digital input signals. The three pins have a 0.1″ spacing that works wi..
1.90€
Ex Tax:1.51€
Brand: Pololu
Model: POLO/1401/1528
This miniature single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or as a small tactile bump sensor for your robot. The switch body dimension is 12.8 x 6.0 x 6.5 mm (0.50" x 0.24" x 0.26"), and the lever arm is 13.5 mm (0.53") long. This three-pin switch can also b..
1.97€
Ex Tax:1.57€
Brand: Pololu
Model: POLO/2738
Description: The Pololu MinIMU-9 v5 is a compact (0.8″ × 0.5″) board that combines ST’s LSM6DS33 3-axis gyroscope and 3-axis accelerometer and LIS3MDL 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore recommend careful reading of the LSM6DS33 datasheet (1MB pdf) ..
39.37€
Ex Tax:31.37€
Brand: Microbot
Model: MR100-001-1
The Microbot MiniRover 4WD Chassis is the ideal choice for those who want to begin exploring the exciting world of robotics by experimental practice; the choice of the Microbot MiniRover 4WD Chassis allows to take advantage of 4 powerfull gearmotors and above all a rugged aluminum structure to make ..
133.60€
Ex Tax:106.45€
Brand: Sparkfun
Model: COM09278
Description: It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch.
The hot red safety cover protects a toggle switch from accidentally being turned on..
2.53€
Ex Tax:2.02€
Brand: Olimex
Model: OL-MOD-BMP085
Description: BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level)
BMP085 is with I2C interface and can connect to any board with UEXT
Documents: Here..
10.02€
Ex Tax:7.98€
Brand: Olimex
Model: OL-MOD-ENC28J60
Description: DEVELOPMENT BOARD WITH UEXT CONNECTOR AND 10 MBIT ENC28J60 ETHERNET CONTROLLER
Features:
MOD-ENC28J60 is the easiest way to add 10 Mbit ethernet connectivity to any of our boards with UEXT connector
ENC28J60 Ethernet controller with UEXT connector for easy connection to our o..
14.07€
Ex Tax:11.21€
Brand: Olimex
Model: OL-MOD-HMC5883L
HMC5883L is 3-Axis Digital Compass with 12-bit ADC that enables 1° to 2° compass heading accuracy. HMC5883L usses I2C communication interface and can connect to any board with UEXT...
15.08€
Ex Tax:12.02€
Brand: Olimex
Model: OL-MOD-LCD1X9
Description: MOD-LCD-1x9 is a LCD with a UEXT universal connector. It can be attached and it adds LCD functionality to all other development boards. The LCD is controlled by I2C.
Features:
LCD 1x9 Alphanumeric
UEXT to connect to host microcontroller (standard connector on our ARM developm..
12.04€
Ex Tax:9.60€
Brand: Olimex
Model: OL-MOD-LCD3310
Description: MOD-LCD3310 is a development board with a UEXT universal connector. It can be attached and it adds LCD functionality to all other development boards.
Features:
NOKIA3310 B/W LCD, 84x48 Wlack/White
UEXT to connect to host microcontroller (standard connector on our ARM developm..
12.04€
Ex Tax:9.60€
Brand: Olimex
Model: OL-MOD-RGB
Description: MOD-RGB is a completely open-source module suitable for controlling LED strips. The LED strips might be of the same color or of different colors. The board can be controlled via I2C or DMX interfaces (led on the UEXT connector). The board has short-circuit protection and can provide up ..
16.09€
Ex Tax:12.82€