Brand: Sparkfun
Model: COM00531
Description: These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. All lenses are clear.
Features:
Standard Size - T1 3/4 5mm
3.4V forward drop
Max current 20mA
Documents:
..
0.96€
Ex Tax:0.77€
Brand: Sparkfun
Model: COM09622
Description: The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment ..
11.08€
Ex Tax:8.83€
Brand: Sparkfun
Model: COM11148
Description: These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These LED holders accept a 10mm LEDand mount into an 1/2" diameter hole..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: COM11147
Description: These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These LED holders accept a 5mm LED and mount into an 11/32" diameter hole...
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: COM00682
Description: LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing.
Unit comes with a black finish and a opaque LED lenses.
Dimensions: 0.33 x 2 x 2"
Documents: Dual Color LED Matrix Datasheet..
8.25€
Ex Tax:6.57€
Brand: Sparkfun
Model: DEV11861
Description: Do you like LED matrices? We do! Now we are giving you the power to make your own with minimal soldering any beginner can perform and give you a great introduction to programming an LED Matrix. This kit will show you how to use the MAX7219 to interface Arduino to easily drive an 8X8 LED..
13.36€
Ex Tax:10.65€
Brand: Sparkfun
Model: COM11459
Description: Sometimes when you have too many choices, it's hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that's all you want. Well here you go! The LED Mixed Bag contains one each of our 10mm LEDs as well as a coin cell battery to light t..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: COM12903
Description: Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well too bad, you are getting two of each! The LED Rainbow Pack contains two diffused 5mm PTH LEDs of each color..
3.95€
Ex Tax:3.15€
Brand: Sparkfun
Model: COM11751
Description: These LED string lights are a great way to add light to any project with little to no soldering required. The insulated strings come in 10m lengths with one RGB LED every 10cm for a total of 100 LED's. The RGB LED's automatically begin cycling through each different color upon powering ..
12.25€
Ex Tax:9.76€
Brand: Sparkfun
Model: DEV12049
Description: This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB su..
33.30€
Ex Tax:26.53€
Brand: Sparkfun
Model: KIT12073
Description: The LilyPad Design Kit (LDK) is a great way to get started with e-textiles. The LDK includes everything you need to complete 6 simple experiments that will teach you how to sew basic circuits, light LEDs, create interactive designs, and more. You don’t need any previous sewing or electr..
80.87€
Ex Tax:64.44€
Brand: Sparkfun
Model: DEV08777
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the loc..
6.98€
Ex Tax:5.56€