Brand: Sparkfun
Model: WRL00662
Description: This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules.
Dimensions: 4" Length (10cm)..
5.97€
Ex Tax:4.76€
Brand: Sparkfun
Model: WRL09145
Description: This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors...
5.01€
Ex Tax:3.99€
Brand: DFRobot
Model: DFR0074
Introduction
This interface shield supports multi-interfaces, SPI interface (directly connected Shiftout module, SPI LCD display module, SPI LED display module), IIC Interface (direct connects IIC lCD display module, IIC transfer IO module), Micro SD card interface (Micro SD card can be directly ..
17.31€
Ex Tax:13.79€
Brand: DFRobot
Model: DFR0165
INTRODUCTION: Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. Besides, we also added a prototy..
27.23€
Ex Tax:21.69€
Brand: DFRobot
Model: DFR0107
ntroduction
This IR kit provides a remote control capability to your project.
Documents
Arduino Library
Wiki Doc
Shipping List
IR Remote Controller (1 unit)
IR Receiver Module (1 unit) (SKU: DFR0094)
Digital Cable (1 unit)..
12.25€
Ex Tax:9.76€
Brand: Sparkfun
Model: SEN08554
This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Documents:
Datas..
10,119.96€
Ex Tax:8,063.71€
Brand: Sparkfun
Model: SEN10266
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN di..
2.99€
Ex Tax:2.38€
Brand: Sparkfun
Model: DEV10549
Description: The JPEG Trigger interfaces with the LinkSprite JPEG Color Camera to simplify picture taking. To take a picture, all you have to do is pull one of three digital pins to ground (D2, 3 or 4), or pull one of three analog pins to 5V (A0, 1 or 2). The on-board Arduino compatible ATmega328 is..
30.57€
Ex Tax:24.35€
Brand: Pololu
Model: POLO/3147
Description: This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio co..
186.67€
Ex Tax:148.74€
Brand: Pololu
Model: POLO/2180
This female JST plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed...
1.97€
Ex Tax:1.57€
Brand: Pololu
Model: POLO/2181
This male JST plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed...
1.97€
Ex Tax:1.57€
Brand: Waveshare
Model: W10656
Description: Jumper Wire 3-pin to separated pins ~ 20 cm
Connector : 3-pin female connector in on end, separated pins in the other end
Pitch : 2.54mm..
1.32€
Ex Tax:1.05€