Brand: Robomaa.com
Model: RM-112
Introduction
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
Specifications
..
5.01€
Ex Tax:3.99€
Brand: DFRobot
Model: FIT0064
Introduction
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
Specifications
&n..
8.05€
Ex Tax:6.41€
Brand: Pololu
Model: Micromotor992
Overview
These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negativel..
19.33€
Ex Tax:15.40€
Brand: Pololu
Model: POLO/1101
Overview
These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negativ..
19.33€
Ex Tax:15.40€
Brand: Arduino
Model: C000013
10 k potentiometer
Features:
6mm carbon potentiometers with plastic housing and protection type IP 5 (dustproof).
CA6 potentiometers are available in through-hole.
size and knob may vary
Documents: datasheet..
0.40€
Ex Tax:0.32€
Brand: Pololu
Model: POLO/1122
This compact, inexpensive, low-current gearmotor (gearbox with motor) offers high rotation speed and decent torque, making it well-suited for use in small robots. At 4.5 V, it has a free-run speed of 120 RPM and a stall torque of approximately 20 oz-in.
Dimensions
Size: 36.5 x 20 x 27.4 mm
..
8.10€
Ex Tax:6.45€
Brand: DFRobot
Model: FIT0021
Introduction
This is a 128x64 liquid crystal display that support Chinese character , English characters and even graphics, very suitable for interactive work with Arduino.
Specifications
Voltage: 5V
Blue backlit
Controller: ST7920
Size: 93x70mm
Documents
Setting Pixels ..
22.47€
Ex Tax:17.90€
Brand: Seeedstudio
Model: LCD102B6B
Description: Graphic LCD 128*64 (KS0108 ctrl) - D.Blue and Yellow Green
Features:
Compatible to Arduino LCD library
LCD Display mode: STN-YG, Postive, Transflective
Display Color: Deep Blue/Light Yellow Green
View Angle: 6H
Driving Method: 1/64 duty, 1/9bias
Back Light: Yellow Gre..
30.26€
Ex Tax:24.11€
Brand: Pololu
Model: POLO/2895
Overview: This powerful synchronous switching boost regulator efficiently generates an output voltage of 12 V from an input voltage as low as 2.9 V while using an input current as high as 7 A. This regulator features reverse voltage protection, and unlike most boost regulators, it offers a true shut..
33.30€
Ex Tax:26.53€
Brand: Pololu
Model: Micromotor1097
Overview
These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negativ..
19.33€
Ex Tax:15.40€
Brand: Pololu
Model: POLO/997
Overview
These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negativ..
19.33€
Ex Tax:15.40€