Brand: Olimex
Model: OL-A4983
Description: A4983 driver can control stepper motors and have two channels. The board can also power gear motors. It might be supplied by voltage in the 6V to 35V range. Arduino, Pinguino, Maple can be used to control motors via this board. The spring contacts allow easy connect-disconnect of motor ..
15.08€
Ex Tax:12.02€
Brand: MikroElektronika
Model: ME-1526
Description: DC MOTOR click™ is a DC motor driver board in mikroBUS™ form factor. It features the DRV8833RTY H-Bridge motor driver, 74HC4053 multiplexer and two screw terminals. The 74HC4053 IC is incorporated into the design in order to run the motor with only one PWM line available on the mikroBUS..
23.18€
Ex Tax:18.47€
Brand: Waveshare
Model: W19764
Description: DC Motor Driver Module for Raspberry Pi Pico, driving up to 4x DC motors. Suitable for 2WD or 4WD driving.
Features:
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
I2C controlled, supports 32x different I2C addresses by setting the 5 address jumpers
On..
29.25€
Ex Tax:23.31€
Brand: Waveshare
Model: W15220
Description: This driver board gives your micro:bit the ability to drive two channel DC motors and three channel servos. It's an ideal choice for you to DIY mobile robots
Features:
micro:bit edge connector, directly pluggable
2x DC motor interfaces, 3x servo interfaces
Integrates 5V reg..
24.19€
Ex Tax:19.27€
Brand: Olimex
Model: OL-BB-L298
Description: BB-L298 is dual full bridge driver with up to 2.5A and 7-40V working voltage. It is good to drive Gear Robot motors with reversal function. STATUS LEDs visualize power supply and driver direction. The power connectors are spring type for quick connect disconnect. Inductive load protecti..
15.08€
Ex Tax:12.02€
Brand: Pololu
Model: POLO/3758
Description: This motor driver expansion board and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+. The expansion board features two MAX14870 H-bridge moto..
33.30€
Ex Tax:26.53€
Brand: Pololu
Model: POLO/2756
Description: This motor driver board is an add-on for the Raspberry Pi Model B+, Model A+, or Pi 2 Model B that lets it easily control a pair of bidirectional, brushed DC motors. The expansion board uses a pair of Freescale MC33926 motor drivers, which operate from 5 to 28V and can deliver a continu..
90.89€
Ex Tax:72.42€
Brand: Olimex
Model: OL-BB-VNH3SP30
Description: BB-VNH3SP30 is full bridge driver with up to 30A and 36V working voltage. It is good to drive Gear Robot motors with reversal function. STATUS LEDs visualize power supply and driver direction. The power connectors are spring type for quick connect disconnect. Inductive load protection d..
15.08€
Ex Tax:12.02€
Brand: Pololu
Model: POLO/1364
Description: The Simple Motor Controllers are versatile, general-purpose single-channel motor controllers for brushed, DC motors. Wide operating voltage ranges and the ability to deliver up to several hundred watts in a small form factor make these controllers suitable for many motor control applica..
182.08€
Ex Tax:145.08€
Brand: Kitronik
Model: KT-5001
Description: The Laika Explorer board provides powerful robotics control for the Raspberry Pi. Connect with USB and start with Scratch or Python. For more information on Laika please visit www.project-laika.com
Introducing Laika: The Laika platform allows control of motors, switches, lamps, robot..
21.15€
Ex Tax:16.85€
Brand: Devantech
Model: MD14
Description: The MD14 is designed to provide simple and easy contol of a 24v motor. Forward and reverse are controlled by an input voltage. Motor Speed and Accelleration are preset by using the on-board potentiometers.
Voltage - operates from a 24v supply.
Current - Up to 5A for the motor&..
70.75€
Ex Tax:56.37€
Brand: Kitronik
Model: KT-5620
Description: This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power..
15.08€
Ex Tax:12.02€