Brand: Devantech
Model: USB-I2C
Description: The USB-I2C module is a low cost USB to I2C module, with a simple command set, and interfacing to any I2C device.
The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered from the USB cable and can supply up to 70mA at 5v for extern..
34.80€
Ex Tax:27.73€
Brand: Microbot
Model: MR002-002.1
Micro USB to Serial Adapter is a usefull tool that allows to connect Personal Computers with any microcontroller system via the USB port. This tiny and lightweight board is only 19x13 mm, including the mini-B connector, and its weight is only 1,4 gr (0,05 oz). Interfacing is realized by two 0,100” s..
16.40€
Ex Tax:13.06€
Brand: Devantech
Model: USB-SER01
Description: USB to serial converter at 3.3V levels (5V tolerant receiver). Powered by the FT230X and capable of baud rates from 300 upto 3 Mbaud. Also included is a split end cable allowing easy connection to target.
Documentation: here..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: CAB12977
Description: This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect..
19.13€
Ex Tax:15.24€
Brand: Devantech
Model: USB-ISS
The USB-ISS module is an enhanced version of our low cost USB-I2c module. The USB-ISS is able to connect to I2C, SPI and Serial buses as well as Digital I/O and Analog inputs.
Documentation: Here..
34.80€
Ex Tax:27.73€
Brand: Devantech
Model: USB-RS485B
Description: The USB-RS485 is a complete, self powered, USB to RS485 interface working at any baud rate up to 250k baud. It features automatic bus turn-around - any time your not transmitting the module is listening. Uses the ST485 quarter power tranceiver, so you can have up to 128 devices on the b..
26.21€
Ex Tax:20.89€
New
Brand: DFRobot
Model: DFR0884
This small 12~24V to 5V 3A dual USB power step-down converter
supports all 5V main controllers. Its two USB ports can output 5V/3A at
the same time. With up to 85% conversion, the buck module offers
excellent heat dissipation and has reverse connection protection and
overload protection. Whe..
12.65€
Ex Tax:10.08€
New
Brand: Pololu
Model: POLO/4091
The D36V50Fx family of buck (step-down) voltage regulators generates
lower output voltages from input voltages as high as 50 V. They are
switching regulators (also called switched-mode power supplies (SMPS) or
DC-to-DC converters), which makes them much more efficient than linear
volta..
33.30€
Ex Tax:26.53€
Brand: Sparkfun
Model: PRT17258
Description: This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable..
2.53€
Ex Tax:2.02€
Brand: Sparkfun
Model: CAB14909
Description: USB C is quickly becoming more and more prominent in
the maker community because, let's be honest, who likes trying three
times to insert USB into a port? This FTDI cable is a USB C to Serial
converter which allows for a simple way to connect TTL interface devices
to USB. Each 2..
19.63€
Ex Tax:15.65€
Brand: Waveshare
Model: W16955
Description: HDMI to micro HDMI cable for Raspberry Pi 4
Type of connection cable : HDMI - HDMI
Version : HDMI 1.4, High Speed + Ethernet
Cable length : 1m
Insulation colour : black
Contact plating : gold-plated..
4.00€
Ex Tax:3.19€
Brand: Waveshare
Model: W25222
Industrial Grade Serial Server RS232/485 To WiFi and Ethernet, Modbus
Gateway, MQTT Gateway, Metal Case, Wail-mount And Rail-mount Support (this version is without PoE function). Support Screw Terminal and DC 5.5 Power Port for Power Supply, DC 6~36V. Wide Voltage Range Input. Comes with WiFi ante..
55.56€
Ex Tax:44.27€