Brand: Pololu
Model: POLO/1931
These male pins can be crimped on 22-28AWG wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pitch headers and solderless breadboards. Our wires with pre-crimped terminals use these same pins. One male crimp pin pack consists of 100 pi..
14.68€
Ex Tax:11.69€
Brand: Sparkfun
Model: PRT11490
Description: This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi (NOT FOR Pi 2 or Pi 3 or Pi 4) so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 26 0.1"-spaced pins and is keyed for polarity...
1.32€
Ex Tax:1.05€
Brand: Sparkfun
Model: CAB13028
Description: This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 4, 3, 2, and B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Color may vary...
4.30€
Ex Tax:3.43€
Brand: Sparkfun
Model: PRT17907
The Raspberry Pi Pico Headers Kit provides you with the exact set of solderable headers to get your Raspberry Pi Pico connected to a breadboard or other circuit. This set includes two 20-pin headers, and one 3-pin header; the pins are spaced by 0.1".
Note: Soldering is required for functionality ..
1.95€
Ex Tax:1.55€
Brand: Sparkfun
Model: CAB10646
Description: Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
This is a 15ft (4.5m) length of 6-wire ribbon cable. Check the related products below for..
5.01€
Ex Tax:3.99€
Brand: Sparkfun
Model: CAB10648
Description: Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
This is a 3ft (90 cm) length of 6-wire ribbon cable. Check the related products below for..
1.62€
Ex Tax:1.29€
Brand: Sparkfun
Model: PRT10650
Description: These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.
No..
0.81€
Ex Tax:0.65€
Brand: Sparkfun
Model: PRT10651
Description: These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.
Che..
0.81€
Ex Tax:0.65€
Brand: Sparkfun
Model: PRT08084
Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit stand..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT08235
Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit stand..
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT08432
Description: Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with..
1.01€
Ex Tax:0.81€