Brand: Sparkfun
Model: PRT08026
Description: Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25' (7.62m)..
4.00€
Ex Tax:3.19€
Brand: Sparkfun
Model: PRT08024
Description: Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25' (7.62m)..
4.00€
Ex Tax:3.19€
Brand: Sparkfun
Model: COM00525
Description: 2 Wire Serial Communication (I2C) EEPROM - The back bone of any microprocessor project. These 8 pin chips need only two wires to communicate and retain their data even with power failure. Use the 256K EEPROM for some serious data storage!
Check out the Portuguese Arduino Tutorial and..
2.99€
Ex Tax:2.38€
Brand: DFRobot
Model: DFR0063
Introduction: This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: CAB00501
Description: These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads.
Dimensions: 14" Long (35cm)..
13.06€
Ex Tax:10.40€
Brand: Sparkfun
Model: CAB09741
Description: These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with..
6.98€
Ex Tax:5.56€
Brand: Waveshare
Model: W15264
Description: This is a camera module (without driver PCB) compatible with the official Raspberry Pi Camera Board V2, with 8-megapixel IMX219 sensor and features 160 degree field of view.
If you got a Raspberry Pi Camera Board V2 and just want to try something new, here it is.
Features:
I..
18.12€
Ex Tax:14.44€
Brand: Sparkfun
Model: SEN00241
Description: Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a simple ADC on any microcontroller will allow variable readings to be collected from the detector. T..
2.58€
Ex Tax:2.06€
Brand: Sparkfun
Model: COM09854
Features:
IR LEDs
Standard size - T1 3/4 5mm
1.4-1.6V forward drop
Max current 20mA..
1.52€
Ex Tax:1.21€
Brand: Sparkfun
Model: COM11759
Description: Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. We have designed the remote to be small, very simple, and low-cost. For the majority of the projects we build, we don’t need 34 button..
6.28€
Ex Tax:5.00€
Brand: Sparkfun
Model: SEN08733
Description: Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.
Length: 13 cm..
1.97€
Ex Tax:1.57€
Brand: Sparkfun
Model: WRL00662
Description: This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules.
Dimensions: 4" Length (10cm)..
5.97€
Ex Tax:4.76€