Brand: Adafruit
Model: ADA-1648
Description: This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable is 300mm long We have cables in 50mm, 100mm, 2..
3.95€
Ex Tax:3.15€
Brand: Waveshare
Model: W14955
Description: Raspberry Pi Camera Cable FFC 60cm. This cable is 600mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit.
Category: FFC
For use with: Raspberry Pi Cameras
Length: 600mmfor Raspberry Pi 4..
5.97€
Ex Tax:4.76€
Brand: Sparkfun
Model: SEN10264
Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad!
The resistance of t..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: TOL12783+33
These plastic Flexible Coolant Pipes have been primarily used to spray refrigeration or washing fluid for machine tools but, thanks to their articulation, they can be used in a multitude of different ways as well. We use them as extra arms for our third hand. The coolant pipes are 1ft long with a no..
5.97€
Ex Tax:4.76€
Brand: Sparkfun
Model: SEN11207
Description: This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressu..
28.54€
Ex Tax:22.74€
Brand: Sparkfun
Model: KIT15948
Description: Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout..
373.46€
Ex Tax:297.58€
Brand: DFRobot
Model: DFR0136
Introduction
This is probably the smallest Arduino controller speically designed for controlling servos. It features a 12 standard servo control capbility with an Xbee socket which can be used in model helicopters or UAVs via the Xbee link. The feather weight (7.5g) makes it an ideal controller..
25.50€
Ex Tax:20.32€
Brand: Sparkfun
Model: 09375
This is a force sensing resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be large..
11.13€
Ex Tax:8.87€
Brand: Sparkfun
Model: 09673
This is a small force sensing resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resista..
10.12€
Ex Tax:8.06€
Brand: Sparkfun
Model: 09376
This is a force sensing resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger t..
13.16€
Ex Tax:10.48€
Brand: Sparkfun
Model: 09674
Description: This is a very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FS..
20.44€
Ex Tax:16.29€
Brand: Sparkfun
Model: DEV09873
Description: This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI ca..
22.77€
Ex Tax:18.15€